Operating The Shut-Off Valves - Danfoss BOCK HA44e Operating Manual

6| Compressor assembly
A rule of thumb: Always lay the first pipe section starting from the shut-off valve downwards and
parallel to the drive shaft.
Rigid
fixed point
D
GB
6.6 Operating the shut-off valves
F
Before opening or closing the shut-off valve, release the valve spindle seal by approx. ¼ of a turn
counter-clockwise.
E
After activating the shut-off valve, re-tighten the adjustable valve spindle seal clockwise.
Fig. 7
14 | AQ452839384735en-000301
As short as
possible
Valve spindle seal
Release
Fig. 8
© Danfoss | Climate Solutions | 2024.03
Fig. 6
Tighten