Oliver 4265C Series Owner's Manual
  1. Manuals
  2. Brands
  3. Oliver Manuals
  4. Power Tool
  5. 4265C
  6. Owner's manual

Oliver 4265C Series Owner's Manual

Hide thumbs Also See for 4265C Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Jointer
4265C Series
Owner's Manual
For Models Manufactured Since 06/2024
Oliver Machinery
1-800-559-5065
921 Thomas Ave SW,
Renton, WA 98057
info@olivermachinery.net
WWW.OLIVERMACHINERY.NET
175370
Stock Number: 4265C.051T
4265C.053T
Manual Version: 3.0.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 4265C Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Oliver 4265C Series

Summary of Contents for Oliver 4265C Series

  • Page 1 Jointer 4265C Series Owner’s Manual For Models Manufactured Since 06/2024 175370 Oliver Machinery 1-800-559-5065 921 Thomas Ave SW, Renton, WA 98057 Stock Number: 4265C.051T info@olivermachinery.net 4265C.053T WWW.OLIVERMACHINERY.NET Manual Version: 3.0.0...
  • Page 3 USAGE OF SAFETY AND PROTECTION DEVICES. OLIVER MACHINERY DISCLAIMS ANY LIABILITY FOR MACHINES THAT HAVE BEEN ALTERED OR ABUSED. OLIVER MACHINERY RESERVES THE RIGHT TO EFFECT AT ANY TIME, WITHOUT PRIOR NOTICE, THOSE ALTERATIONS TO PARTS, FITTINGS, AND ACCESSORY EQUIPMENT WHICH THEY MAY DEEM NECESSARY FOR ANY REASON WHATSOEVER.

  • Page 4: Table Of Contents

    Table of Contents DRO Calibration ········································ 28 Introduction············································· 6 Test Run ··················································· 29 Specifications ·········································· 7 Operation ·············································· 30 Identification ··········································10 Preparation ·············································· 30 Safety ·····················································12 Inspect Wood Grain ·································· 31 General Safety Guidelines ························· 12 Squaring Stock ·········································· 31 Safety Guidelines Specific to Jointer ··········...
  • Page 5 Wiring Diagram ······································53 Notes ····················································· 69 For Stock # 4265C.051T (230V, 1Ph) ·········· 53 Warranty and Service····························· 70 For Stock # 4265C.053T (230V, 3Ph) ·········· 54 Appendix ··············································· 71 Parts List ················································55 US Standard – Metric Conversion Chart ····· 71 Maintenance Record ·······························68...

  • Page 6: Introduction

    Introduction Thank you for choosing Oliver! This manual contains important information on how to safely set up, operate, and maintain this machine. Please take the time to read through this manual, and make sure you understand all the instructions. While this manual may provide tips on optimizing the result of your workpiece, the manual is not intended as a substitute for formal woodworking training.

  • Page 7: Specifications

    Specifications Quick View Model 4265C.051T / 4265C.753T Jointer Stock Number 4265C.051T 4265C.053T Motor TEFC Induction Motor TEFC Induction Motor 5HP, 230V, 1Ph 5HP, 230V, 3Ph Jointer Size 12” Max. Depth of Cut (Jointing) 1/8" Max. Depth of Cut (Rabbeting) 3/4” Bevel Joining 45°...
  • Page 8 Cutter Blade Angle 30 degree Cutter Insert Screw Tensioning Torque 52-60 lb-in Table Table Dimensions 88-1/4”(L) x 12”(W) Table Height Above Ground 34-1/4” Table Lifting / Adjustment Mechanism Parallelogram Material Precision ground cast iron 8 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...
  • Page 9 Measurements Measurement Unit Inch/mm Measurement Device Wixey digital readout Digital Readout Resolution 1/32” / 0.005” / 0.1mm Digital Readout Accuracy ±1/500” / 0.002” / 0.05mm Backup Measurement Device Cutting depth scale with a pointer. Safety Stock Number 4265C.051T 4265C.053T Number of Dust Ports Dust Port Size 6”...

  • Page 10: Identification

    Identification 10 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...
  • Page 11 4265C.051T/ 4265C.053T Jointer OLIVERMACHINERY.NET 11 | Page...

  • Page 12: Safety

    Safety Oliver Machinery has made every attempt to provide a safe, reliable, easy-to-use piece of machinery. Safety, however, is ultimately depending on the individual machine operator. Before operating this machine, please become familiar with the following safety labels and guidelines.

  • Page 13: Safety Guidelines Specific To Jointer

    13. PROPER USE: Do not use this machine for anything other than its intended use. If used for other purposes, Oliver Machinery disclaims any real or implied warranty and holds itself harmless for any injury or damage that may result from that use.
  • Page 14 1. STOP THE MACHINE if the operator leaves the machine for any reason. 2. WAIT until the machine comes to a complete stop. 3. LOCK the power switch. 4. CLEAN UP before departure. 14 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...

  • Page 15: Electricals

    Electricals Faulty electrical work can cause electrocution and is a fire hazard. Make sure the voltage of your power circuit matches the power requirement of this machine, and that the circuit is sized to supply power to the jointer. WARNING All electrical work must be completed by a licensed electrician and must meet the local electrical code in your area.
  • Page 16 Using undersized wires may cause overheating and increase the risk of WARNING fire and machine damage. Improper copper-aluminum wire connection is a fire hazard. If the power circuit available uses aluminum wires, use certified CU/AL wire connectors. WARNING 16 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...

  • Page 17: Setup

    Setup Shop Preparation Space Requirement The dimensions of this machine are 88-1/4”(L) x 39- 1/2”(W). You will need additional spaces for manipulating your workpiece, electrical connection, and dust collection. Load Limits This machine has a shipping weight of 980 lbs., and a net weight of 814 lbs. Please ensure all lifting tools and building structures have adequate load capacity, for transporting and supporting the total weight of this machine, the operator, and related items.

  • Page 18: Receiving

    Unboxing The crate contains a jointer that is mostly assembled. It also contains two paper boxes with loose parts and accessories. Everything is packed inside a large plastic bag. 18 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...
  • Page 19 Inventory Carefully unwrap the packaging and inventory the items received: Item Description Quantity T-25 Torx Screwdrivers Spare Cutter Inserts and Torx Screws 10 each 17/19 mm Combination Wrench Metric hex wrench set (5,6,8 mm) 1 each AAA Batteries Push blocks Cutterhead guard NOTICE: If you cannot find an item in the list above, please check if it is still attached to the packaging or inside the cabinet.
  • Page 20 WARNING damage may occur. Use the lifting hooks for lifting the jointer. Do not lift the machine by the tables as IMPORTANT it may alter the alignment of the tables. 20 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...

  • Page 21: Cleaning

    Cleaning To prevent rusting, the unpainted cast iron parts of this jointer are covered with machine oil and plastic film. Loosen the fence tilt lock. Raise the fence above the table, then lock the fence in place. Release the fence position lock, and use the fence position knob to move the fence backward and expose the entire jointer table.

  • Page 22: Assembly

    2. Remove all six cap screws from the control panel post. Install Batteries for Digital Readout Locate the digital readout on the control panel. Remove the battery cover and install two AAA-sized batteries. 22 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...
  • Page 23 Install Cutterhead Guard 1. Loosen the fence tilt lock and raise the fence 5. There is a spring-loaded knob at the bottom above the table. Lock the fence in place. of the rabbeting table. It has a socket head Release the fence position lock, and move cap screw to secure the cutterhead guard the fence to the back.

  • Page 24: Leveling Machine

    IMPORTANT inside the jointer. This can damage the machine and cause other hazardous situations. Check your dust collection system regularly to make sure it is not clogged or filled up. 24 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...

  • Page 25: Wiring And Grounding

    Wiring and Grounding Deenergize the electrical circuit before touching any enclosed, electrified parts. Touching an electrified part WILL result in serious personal injury or death. DANGER This jointer is a heavy-duty, industrial-grade machine. The electrical work must be completed by a licensed electrician and meet the local electrical code requirements.

  • Page 26: Controls And Components

    • Turn CLOCKWISE to reduce depth of cut. • Turn COUNTERCLOCKWISE to increase depth of cut. • The handle of the handwheel can be folded down as needed. 26 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...

  • Page 27: Infeed Table Depth Stop Release Knob

    Infeed Table Depth Stop Release Knob Fence As a safety feature, this machine comes with a This precision ground cast iron fence has three positive depth stop to prevent the depth of cut adjustable positive stops at 45°, 90°, and 135°. goes beyond 1/8”...

  • Page 28: Digital Readout (Dro)

    OR if a user recalibrates the DRO. The incremental mode shows the distance the infeed table traveled since the last reset. The readings can be reset by leaving the incremental mode. 28 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...

  • Page 29: Test Run

    Test Run Each jointer has been inspected and calibrated before leaving the factory to meet our quality and precision standards. Due to various reasons, this jointer may need to be re-adjusted when it arrives at your workshop. It is recommended to complete this test run before using the jointer for production work and repeat if the jointer is relocated.

  • Page 30: Operation

    Glue Deposits Glue left on the workpiece surface can dull cutters and lower cut quality. Scrape off all glue deposits from the workpiece before the work begins. 30 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...

  • Page 31: Inspect Wood Grain

    Inspect Wood Grain To achieve optimal results, cut WITH the grain. Inspect the wood grain from the side of a workpiece to determine the feed direction. Avoid cutting against/across/end grain as severe kickback and chipping may occur. Some workpieces have complex wood grains and it is impossible to cut with the grain for the entire length of a workpiece.

  • Page 32: Surface Planing

    7. As the left feeding hand approaches the cutterhead, stop feeding. Carefully lift the left-hand push block and use it to feed the portion of the workpiece that is on the outfeed table. Maintain control of the workpiece with the right hand while repositioning the left hand. 32 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...
  • Page 33 8. As the right feeding hand approaches the cutterhead, stop feeding. Carefully lift the right-hand push block and move the entire body towards the outfeed table. Place the right-hand push block on the stock that sits on the outfeed table. Use the left hand to maintain control of the stock while repositioning the right hand.

  • Page 34: Edge Jointing

    1/16” or less based on the width of the Use push blocks to keep hands away from bevel and hardness of the workpiece. the cutterhead. Position both hands and the push blocks above the cutterhead guard when feeding. 34 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...

  • Page 35: Rabbet Cutting

    Rabbet Cutting A rabbet is a groove cut along the edge of a workpiece. This jointer is capable of making rabbet cuts as deep as 3/4". Depending on the requirements and constraints of your project, a jointer, or other tools such as a table saw, router, or other hand tools, can be the best tool for your rabbeting needs.

  • Page 36: Common Cutting Problems

    This can happen when planing wood with high moisture content or if the cutter is dull. Sometimes it is impossible to avoid fuzzy grain due to the nature of certain wood types. To mitigate this issue, avoid using wood with high moisture content and use sharp cutters. 36 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...

  • Page 37: Accessories

    Accessories Oliver Machinery has a collection of accessories and add-ons to enhance the productivity of your jointer. Please visit our website OLIVERMACHINERY.NET to purchase these items. You may also call 1-800-559-5065 or email PARTS@OLIVERMACHINERY.NET to place an order. We are available Monday through Friday, 7:30 AM - 4 PM Pacific Time.

  • Page 38: Power Feeder

    8 Speeds: 6.6 / 13 / 18 / 22 / 36 / 43 / 55 / 108 FPM Net Weight 146 lbs. Please visit our website at WWW.OLIVERMACHINERY.NET/ACCESSORIES for other recommended accessories. 38 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...

  • Page 39: Maintenance

    Maintenance Routine maintenance keeps your jointer in top shape. Please follow the maintenance schedule below, and use the maintenance record worksheet in the manual to document all tasks completed. NOTICE: Maintenance schedule may vary for individual users due to different situations and safety requirements. Disconnect the machine from the power source before any maintenance work is performed.

  • Page 40: Inspect / Adjust Jointer Tables

    5. When the height of the outfeed table is If the outfeed table height is set properly, jump adjusted, tighten the locking cap screw to to section “Inspect Outfeed Table Parallelism”. lock its height. 40 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...

  • Page 41: Inspect Outfeed Table Parallelism

    Inspect Outfeed Table Parallelism Inspect Infeed Table 1. Disconnect the jointer from the power 1. Disconnect the jointer from the power source!! source!! 2. Place a straight edge on the outfeed table in 2. NOTICE: Make sure the outfeed table is positions as shown below: properly adjusted before continue.

  • Page 42: Adjust Table Parallelism/Coplanarity

    6. This picture shows the jointer with the parallelogram mechanism exposed. Table parallelism /coplanarity can be adjusted by rotating the eccentric nuts on the shafts [1-4]. There is a pair of eccentric nuts located on each end of these shafts. 42 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...
  • Page 43 7. Locate and loosen the set screws for locking the eccentric nuts as shown in the pictures. The eccentric nuts should be fairly loose once they are unlocked. 8. Adjust the outfeed table. Rotate the 12. With the fence locked, gently rock the fence eccentric nuts to align the outfeed table and to ensure the outfeed table is stable.

  • Page 44: Infeed Table Adjustments

    1. Disconnect the jointer from the power source!! 2. Loosen the jam nut that locks the stop bolt. 3. Rotate the stop bolt until it stops the infeed table at the correct height. Re-tighten the jam nuts. 44 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...

  • Page 45: Rotate / Replace Cutter Inserts

    Rotate / Replace Cutter Inserts Cutter inserts are extremely sharp. Wear thick leather gloves to avoid hand injuries. CAUTION 1. Disconnect the jointer from the power 8. With the cutter insert removed from its source!! platform, thoroughly clean the cutter insert platform with a vacuum or compressed air.

  • Page 46: Adjust Fence Positive Stops

    7. If the positive stop is set correctly, hold the bolt in place and tighten the jam nut, then recheck the positive stop with the fence locked in place. 46 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...

  • Page 47: Adjust Belt Tension

    Adjust Belt Tension The belt and pulleys may be hot after operations. Allow components to cool before CAUTION servicing. 1. Disconnect the jointer from the power 5. If the belt need needs to be replaced, walk source!! the belt away from the motor pulley. 2.

  • Page 48: Align Belt Pulleys

    5. Realign motor pulley with cutterhead pulley. 6. Retighten the motor pulley locking screws. 7. Retighten the belt. 8. Close the belt cover and motor access panel after adjustments. 48 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...

  • Page 49: Troubleshooting

    Troubleshooting Mechanical / Electrical Issues Problem Possible Cause Possible Solution Machine does not start. Machine is not 1. Make sure the machine is plugged in, or the connected to a power disconnect is at the ON position. power source. 2. Check the electrical panel for a tripped circuit breaker or a blown fuse.
  • Page 50 V-belt if it shows signs of aging. Improper motor Check and adjust motor mounting. mounting. Loose components. Tighten loose fasteners. Worn bearings. Contact customer service for assistance. 50 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...

  • Page 51: Operation / Quality-Related Issues

    Operation / Quality-Related Issues Problem Possible Cause Possible Solution Workpiece came out Improper feeding. Use the outfeed table as the reference point for twisted. feeding. Apply even pressure and feed rate on the entire workpiece. Too much downward Avoid flattening the workpiece by applying too feeding pressure.
  • Page 52 Keep the feed rate consistent. the workpiece. Finished stock is Infeed/outfeed tables Ensure the outfeed table is parallel with the concave/convex in are not coplanar. cutterhead, and the outfeed/infeed tables are the middle. coplanar. 52 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...

  • Page 53: Wiring Diagram

    Wiring Diagram For Stock # 4265C.051T (230V, 1Ph) 4265C.051T/ 4265C.053T Jointer OLIVERMACHINERY.NET 53 | Page...

  • Page 54: For Stock # 4265C.053T (230V, 3Ph)

    For Stock # 4265C.053T (230V, 3Ph) 54 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...

  • Page 55: Parts List

    Parts List Fence Assembly 4265C.051T/ 4265C.053T Jointer OLIVERMACHINERY.NET 55 | Page...
  • Page 56 Table and Cutterhead Assembly 56 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...
  • Page 57 Base Assembly 4265C.051T/ 4265C.053T Jointer OLIVERMACHINERY.NET 57 | Page...
  • Page 58 Motor and Cabinet 58 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...
  • Page 59 Part Number Descriptions 006305-100 Spring Washer 8.2*13.7 000804-101 Flat Head Cap Screw M5*0.8P*8 008304-800 Lock Nut M6*1.0P(10B*7H) 000102-103 Cap Screw M5*0.8P*10 006303-100 Spring Washer 6.5*10.5 008004-100 Hex. Nut M5*0.8P(8B*4H) 006001-125 Flat Waher 15.5*25*2.5t 006011-023 Flat Washer 6.3*13*2.0t 000003-108 Hex Screw M8*1.25P*40 008006-100 Hex Nut M8*1.25P(13B*6.5H) 000104-110...
  • Page 60 Set Lock Screw M6*1.0P*8 002602-101 Cap Lock Screw M6*1.0P*12 361335-901 Shaft 381392-902 Eccentric Bushing 174513-904 Shaft Plate 381393-902 Bushing 174512-904 Shaft Plate 174639-000 Plate 174650-904 Shaft Plate 174515-904 Shaft Plate 070070-902 Toothed Bracket 60 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...
  • Page 61 Part Number Descriptions 000104-111 Cap Screw M8*1.25P*35 011103-103 Taper Pin 5.0*20 000105-102 Cap Screw M10*1.5P*25 006001-075 Flat Washer 10.3*22*2.0t 006001-038 Flat Washer 8*16*1.6t 000104-106 Cap Screw M8*1.25P*20 174656-904 Scale Seat 174516-904 Position Bracket 001501-101 Cap Screw w/Spring Washer& Flat Washer M8*1.25P*20/8.2*15.4/8.5*19*2t 010006-000 S-Ring STW-15...
  • Page 62 Cap Screw M5*0.8P*6 021801-000 Snap Bushing NB-1722 006001-131 Flat Washer 5.3*10*2.0t 006001-181 Flat Washer 5*16*3.0t 950785-001 Magnetic Strip Assembly 000102-104 Cap Lock Screw M5*0.8P*12 000805-101 Flat Head Cap Screw M4*0.7P*6 574956-000 Switch Panel 62 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...
  • Page 63 Part Number Descriptions 490019-000 Key Switch 490039-000 Stop Switch 490040-000 Start Switch 471037-083 CSA Cable 18AWG*1C*150mm 490488-000 Battery (local purchase) AAA 006501-100 Outer Toothed Washer 4.3*8.5(BW-4) 006002-200 Flat Washer 4.3*8*0.8t 008002-200 Hex Nut M4*0.7P(7B*3.2H) 491210-000 Digital Readout WR5502CT 174750-000 Position Bracket 001202-602 Self-Tapping Screw M3*1.06P*6 730139-001...
  • Page 64 Pan Phillips Screw M4*0.7P*10 170638-156 Lifting Hook 000303-804 Pan Phillips Screw M5*0.8P*12 006502-300 Outer Toothed Washer 5.3*10(BW-5) 471008-001 CSA Cable 10AWG*1C*153mm 250573-615 Bushing 490336-000 Terminal Socket HD-30-A3(600V/40A) 000303-109 Pan Phillips Screw M5*0.8P*35 64 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...
  • Page 65 Part Number Descriptions 023701-015 Strain Relief MGB25-18B 491116-008 Junction Box Lower Cover 490124-008 Junction Box Upper Cover 003303-102 Pan Phillips Screw 3/16"-24NC*1/4" 242.1 938211-001 Switch Assembly 5HP 220V 1Ph 242.01 170977-901 Switch Plate 242.02 821017-066 Magnetic Switch 5HP 220V 1Ph 242* 490295-000 230V Magnetic Contactor MA-30(220V-240V) 5HP 1Ph...
  • Page 66 Hex. Screw M8*1.25P*25 360870-901 Fixing Shaft 050904-000 Sliding Arm - Left 923660-001 Lead Screw Assembly 304.1 380839-901 Lead Screw 304.2 008009-100 HEX. NUT M12*1.75P(19B*10H) 000003-107 Hex. Screw M8*1.25P*35 000003-104 Hex. Screw M8*1.25P*20 66 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...
  • Page 67 Part Number Descriptions 050903-000 Sliding Arm - Right 000105-101 Cap Screw M10*1.5P*20 380828-902 Connect Bolck 070050-000 922152-000 Handle Assembly 051534-000 Fence Body 050907-000 Block Depth 230279-000 Lock Handle 051536-000 Fence Bracket 021003-000 Zip Tie ALT-150M 000104-105 CAP Screw M8*1.25P*18 175314-904 Right Lock Plate 230343-000 Lock Handle M10*1.5P*20...

  • Page 68: Maintenance Record

    Maintenance Record Date Task Operator 68 | Page Oliver Machinery 4265C.051T/ 4265C.053T Jointer...

  • Page 69: Notes

    Notes 4265C.051T/ 4265C.053T Jointer OLIVERMACHINERY.NET 69 | Page...

  • Page 70: Warranty And Service

    Oliver Machinery makes every effort to assure that its equipment meets the highest possible standards of quality and durability. All products sold by Oliver Machinery are warranted to the original customer to be free from defects for a period of two (2) years on all parts excluding electronics and motors which are warranted for one (1) year from the date of shipment.

  • Page 71: Appendix

    Appendix US Standard – Metric Conversion Chart Fractions Decimal In. Millimeters Fractions Decimals In. Millimeters 1/64 .0156 .396 33/64 .5156 13.096 1/32 .0312 .793 17/32 .5312 13.493 3/64 .0469 1.190 35/64 .5469 13.890 1/16 .0625 1.587 9/16 .5625 14.287 5/64 .0781 1.984 37/64...
  • Page 72 Oliver Machinery is always adding new Industrial Woodworking products to the line. For complete, up-to-date product information, visit us online at: WWW.OLIVERMACHINERY.NET or call toll-free 1-800-559-5065 ** SAVE THIS MANUAL FOR FUTURE REFERENCE. **...

This manual is also suitable for:

4265c.051t4265c.753t4265c.053t

Table of Contents