Oliver 4265 Owner's Manual
  1. Manuals
  2. Brands
  3. Oliver Manuals
  4. Power Tool
  5. 4265
  6. Owner's manual

Oliver 4265 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Jointer
Model 4265
Owner's Manual
For Models Manufactured Since 06/2019
Oliver Machinery
1-800-559-5065
6902 S 194th St, Kent, WA 98032
info@olivermachinery.net
WWW.OLIVERMACHINERY.NET
175370
Stock Number: 4265.101.4S
4265.102.4S
Manual Version: 1.0.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 4265 and is the answer not in the manual?

Questions and answers

Related Manuals for Oliver 4265

Summary of Contents for Oliver 4265

  • Page 1 Jointer Model 4265 Owner’s Manual For Models Manufactured Since 06/2019 175370 Oliver Machinery 1-800-559-5065 6902 S 194th St, Kent, WA 98032 Stock Number: 4265.101.4S info@olivermachinery.net 4265.102.4S WWW.OLIVERMACHINERY.NET Manual Version: 1.0.0...
  • Page 3 • OLIVER MACHINERY DISCLAIMS ANY LIABILITY FOR MACHINES THAT HAVE BEEN ALTERED OR ABUSED. OLIVER MACHINERY RESERVES THE RIGHT TO EFFECT AT ANY TIME, WITHOUT PRIOR NOTICE, THOSE ALTERATIONS TO PARTS, FITTINGS, AND ACCESSORY EQUIPMENT WHICH THEY MAY DEEM NECESSARY FOR ANY REASON WHATSOEVER.

  • Page 4: Table Of Contents

    Operation ·············································· 29 Electricals ···············································15 Preparation ·············································· 29 Minimum Circuit Size Required for Model Inspect Wood Grain ·································· 30 4265 Jointer ············································· 15 Squaring Stock ·········································· 30 Grounding ················································ 15 Surface Planing ········································· 31 Electrical Wiring ······································· 15 Edge Jointing ············································ 33 Setup ······················································17...
  • Page 5 Touchup Paint ·········································· 36 Wiring Diagram ····································· 51 Power Feeder ··········································· 37 For Stock # 4265.101.4S (230V, 1Ph) ·········· 51 Maintenance ··········································38 For Stock # 4265.102.4S (230/460V, 3Ph) ·· 52 Maintenance Schedule ····························· 38 Parts List ················································ 53 Inspect / Adjust Jointer Tables ·················· 39 Fence Assembly ········································...

  • Page 6: Introduction

    Introduction Thank you for choosing Oliver! This manual contains important information on how to safely set up, operate, and maintain this machine. Please take the time to read through this manual, and make sure you understand all the instructions. While this manual may provide tips on optimizing the result of your workpiece, the manual is not intended as a substitute for formal woodworking training.

  • Page 7: Specifications

    Specifications Quick View Model 4265 Jointer Stock Number 4265.101.4S 4265.102.4S Motor Baldor TEFC Induction Motor Baldor TEFC Induction Motor 3HP, 230V, 1Ph 5HP, 230/460V, 3Ph Jointer Size 12” Max. Depth of Cut (Jointing) 1/8" Max. Depth of Cut (Rabbeting) 3/4”...

  • Page 8: Motor

    Cutter Blade Angle 30 degree Cutter Insert Screw Tensioning Torque 52-60 lbs.-inch Table Table Dimensions 88-1/2”(L) x 12”(W) Table Height Above Ground 34-3/8” Table Lifting / Adjustment Mechanism Parallelogram Material Precision ground cast iron 8 | Page Oliver Machinery 4265 Jointer...

  • Page 9: Measurements

    Sound Rating @ 2’ distance 90-95 dB 92-96 dB Others Serial Number Location On the back of the machine. Spare Parts Included Ten cutter inserts and compatible torx screws. Certification CSA 175370 Country of Origin Taiwan 4265 Jointer OLIVERMACHINERY.NET 9 | Page...

  • Page 10: Identification

    Identification 10 | Page Oliver Machinery 4265 Jointer...
  • Page 11 4265 Jointer OLIVERMACHINERY.NET 11 | Page...

  • Page 12: Safety

    Safety Oliver Machinery has made every attempt to provide a safe, reliable, easy-to-use piece of machinery. Safety, however, is ultimately depending on the individual machine operator. Before operating this machine, please become familiar with the following safety labels and guidelines.

  • Page 13: Safety Guidelines Specific To Jointer

    12. PROPER USE: Do not use this machine for other than its intended use. If used for other purposes, Oliver Machinery disclaims any real or implied warranty and holds itself harmless for any injury or damage which may result from that use.
  • Page 14 After Operation 1. STOP THE MACHINE if the operator leaves the machine for any reason. 2. WAIT until the machine comes to a complete stop. 3. CLEAN UP and LOCK POWER SWITCH before departure. 14 | Page Oliver Machinery 4265 Jointer...

  • Page 15: Electricals

    Please ensure the electrical circuit for this machine meets the minimum circuit size requirement. Minimum circuit size requirement applies to a dedicated circuit which provides power to one 4265 Jointer. If more machines are sharing the same circuit, consult a qualified electrician to ensure the designated circuit is properly sized for safe operation.
  • Page 16 Using undersized wires may cause overheating and increase the risk of fire WARNING and machine damage. Improper copper-aluminum wire connection is a fire hazard. If the power circuit WARNING available uses aluminum wires, use certified CU/AL wire connectors. 16 | Page Oliver Machinery 4265 Jointer...

  • Page 17: Setup

    Piping of dust collection system introduces additional air resistance, and decreases the effective CFM measured at the dust ports. Ensure there is significant suction at the dust port, so dust and debris can be effectively removed from the machine. 4265 Jointer OLIVERMACHINERY.NET 17 | Page...

  • Page 18: Receiving

    On the day of delivery, please be sure help is available to move the machine to its final location. 4265 Jointer has a gross weight of 1057 lbs. and a net weight of 891 lbs. Safe moving techniques and proper lifting equipment required, or serious personal WARNING injury may occur.

  • Page 19: Inventory

    Cutter inserts installation and for checking torx screw tension (52-60 lbs.- inch). T25 Star Bit Socket Cutter inserts installation. Ring Terminal Connector Connecting machine to power. and Crimping Tool IMPORTANT: Always follow local electrical code for electrical work. 4265 Jointer OLIVERMACHINERY.NET 19 | Page...

  • Page 20: Removing Machine From Crate

    When all items are ready for machine setup, attach lifting sling to the lifting hooks located at the two corners of the cabinet. Gently lift machine up from the pallet and move to its final location. 4265 Jointer has a net weight of 891 lbs. All lifting devices must be capable to WARNING handle the load, or serious personal injury and machine damage may occur.

  • Page 21: Assembly

    2. Remove all six cap screws from control panel table adjustment handwheel bracket. post. Install Batteries for Digital Readout Locate the digital readout on the control panel. Remove the battery cover and install 2 AA sized batteries. 4265 Jointer OLIVERMACHINERY.NET 21 | Page...

  • Page 22: Inspect / Adjust Jointer Tables (Optional)

    Always operate this jointer with a cutterhead guard, except for some rabbeting operations. Serious personal injury may occur when operating a jointer without WARNING cutterhead guard. 22 | Page Oliver Machinery 4265 Jointer...

  • Page 23: Leveling Machine

    IMPORTANT inside the jointer. This can damage the machine and cause other hazardous situations. Check your dust collection system regularly to make sure it is not jammed or filled up. 4265 Jointer OLIVERMACHINERY.NET 23 | Page...

  • Page 24: Wiring And Grounding

    6. Hand tighten sealing nut of the strain relief to keep the cord in place. 7. Re-install junction box cover. 24 | Page Oliver Machinery 4265 Jointer...

  • Page 25: Controls And Components

    The depth of cut scale next to the handwheel located right below the control panel: indicates the position of the infeed table.  Turn CLOCKWISE to raise the table.  Turn COUNTERCLOCKWISE to lower the table. 4265 Jointer OLIVERMACHINERY.NET 25 | Page...

  • Page 26: Infeed Table Depth Stop Knob

    Without these plates, the cutterhead will strike the auxiliary fence. Fence This extruded aluminum fence has two adjustable positive stops at 45° and 90°. 26 | Page Oliver Machinery 4265 Jointer...

  • Page 27: Digital Readout (Dro)

    OR if user recalibrates the DRO. Incremental mode shows distance infeed table travelled since the last reset. The readings can be reset by leaving incremental mode. 4265 Jointer OLIVERMACHINERY.NET 27 | Page...

  • Page 28: Test Run

    Congratulations for completing the test run! Now your jointer is ready for production work. If you discover any issue from the tests, please refer to the troubleshooting section and maintenance section for how to diagnose the issue and make adjustments. 28 | Page Oliver Machinery 4265 Jointer...

  • Page 29: Operation

    Avoid using boards with severe warping, as they can be unstable and might cause severe kickbacks during operation. Glue Deposits Glue left on the workpiece surface can dull the cutters and lower cut quality. Scrape off all glue deposits from the workpiece before operation. 4265 Jointer OLIVERMACHINERY.NET 29 | Page...

  • Page 30: Inspect Wood Grain

     Keep hands at least 3” away from the cutterhead.  Use push blocks whenever possible. Ensure dust collection system is functional and use dusk mask to avoid inhaling CAUTION harmful airborne particles. 30 | Page Oliver Machinery 4265 Jointer...

  • Page 31: Surface Planing

    8. As left hand approaches the cutterhead, lift it up and move across the cutterhead to avoid accidental contact. Put left hand on stock that sits on the outfeed table, and continue to feed. Maintain control of stock with right hand while repositioning left hand. 4265 Jointer OLIVERMACHINERY.NET 31 | Page...
  • Page 32 TIP: For thin stock, avoid excessive downward pressure which will flatten any cup or warp as the stock pass through the cutterhead. After pressure is released, the cup or warp will spring back. Only apply adequate pressure to maintain control of the stock when feeding. 32 | Page Oliver Machinery 4265 Jointer...

  • Page 33: Edge Jointing

    Use push blocks whenever permissible. 7. Follow steps [6-10] in “Surface Planing” for feeding stock through the jointer. Repeat the process until the entire edge is jointed flat and square. 4265 Jointer OLIVERMACHINERY.NET 33 | Page...

  • Page 34: Rabbet Cutting

    Take extra caution and maintain support of the entire workpiece throughout the operation. If cutterhead guard is removed for rabbeting operation, use extreme caution when performing cuts. Reinstall the guard immediately when operation WARNING completes. 34 | Page Oliver Machinery 4265 Jointer...

  • Page 35: Common Cutting Problems

    Can happen when planing wood with high moisture content or if the cutter is dull. Sometimes fuzzy grain is unavoidable due to the nature of certain wood types. To mitigate this issue, avoid using wood with high moisture content and use sharp cutters. 4265 Jointer OLIVERMACHINERY.NET 35 | Page...

  • Page 36: Accessories

    Accessories Oliver Machinery has a collection of accessories and add-ons to enhance productivity of your jointer. To purchase these items, please call us at 1-800-559-5065, our representatives are available Monday through Friday, 9AM - 5PM pacific time. You may also purchase them online: WWW.OLIVERMACHINERY.NET/ACCESSORIES...

  • Page 37: Power Feeder

    Power Feeder Two models of power feeder are available for 4265 Jointer. They can be installed on the power feeder mount located behind outfeed table. Features Polyurethane covered rollers provide excellent grip while protecting the work surface. • • Eight feed speeds and choice of three or four rollers to fit any application.

  • Page 38: Maintenance

    Check V-belt tension and replace if belt shows signs of cracking or glazing. Every 6 months Lubricate worm gears with grease. Notice: Motor bearings are permanently sealed and lubricated, and do not require lubrication. 38 | Page Oliver Machinery 4265 Jointer...

  • Page 39: Inspect / Adjust Jointer Tables

    If outfeed table height is set properly, jump to height. section “Inspect Outfeed Table Parallelism”. Inspect Outfeed Table Parallelism 1. Disconnect jointer from power source!! 2. Place a straight edge on outfeed table in positions as shown below: 4265 Jointer OLIVERMACHINERY.NET 39 | Page...

  • Page 40: Inspect Infeed Table

    7. If infeed / outfeed table are out of alignment, move section “Adjust Table Parallelism/Coplanarity”. 8. Otherwise, congratulations! The jointer tables are well calibrated for your next project! 40 | Page Oliver Machinery 4265 Jointer...

  • Page 41: Adjust Table Parallelism/Coplanarity

    6. This picture shows the jointer with the parallelogram mechanism exposed. Table parallelism /coplanarity can be adjusted by rotating the eccentric nuts on the shafts [1-4]. There is a pair of eccentric nuts located on each end of these shafts. 4265 Jointer OLIVERMACHINERY.NET 41 | Page...
  • Page 42 11. When adjustments complete, retighten the set screws to lock all outfeed table eccentric nuts. 12. With the fence locked, gently rock the fence to ensure the outfeed table is stable. If the 42 | Page Oliver Machinery 4265 Jointer...

  • Page 43: Infeed Table Adjustments

    If not, loosen the 2 hex adjustment worm gears. This stop nut screws and readjust the pointer. should stop the table with 1/32” depth of cut. Loosen the jam nuts when making adjustments. 4265 Jointer OLIVERMACHINERY.NET 43 | Page...

  • Page 44: Cutterhead Maintenance

    IMPORTANT: Obstacles between the insert and cutterhead platform will create uneven pressure against the insert. This will lower cut quality and may cause the insert to crack. 44 | Page Oliver Machinery 4265 Jointer...

  • Page 45: Adjust Fence Positive Stops

    4. With the stop bolt holding in place, tighten 4. With the set screws holding in place, tighten the jam nut. the jam nuts. 5. Re-check fence stop settings. 5. Re-check fence stop settings. 4265 Jointer OLIVERMACHINERY.NET 45 | Page...

  • Page 46: Adjust Belt Tension

    (#1). Lower the motor until proper belt needed. tension is reached. Secure the motor mounting plate by tightening both upper 8. Replace belt cover and motor access panel mounting bolts (#2), and the lower when maintenance completes. mounting bolts. 46 | Page Oliver Machinery 4265 Jointer...

  • Page 47: Align Belt Pulleys

    5mm hex wrench, and the motor pulley can move along the motor shaft. 5. Realign motor pulley with cutterhead pulley. 6. Retighten the motor pulley locking screws, then close the belt cover and motor access panel when adjustments complete. 4265 Jointer OLIVERMACHINERY.NET 47 | Page...

  • Page 48: Troubleshooting

    Outfeed table is Outfeed table is Loosen the locking cap screw before adjusting stuck/difficult to adjust. locked. the outfeed table. Digital readout not Dead battery. Replace battery. functional. 48 | Page Oliver Machinery 4265 Jointer...
  • Page 49 Clean belt and pulleys. Adjust belt tension. Replace or hitting belt cover. V-belt if it shows signs of aging. Improper motor Check and adjust motor mounting. mounting. Loose components. Tighten fasteners of the component. Worn bearings. Contact customer service for assistance. 4265 Jointer OLIVERMACHINERY.NET 49 | Page...
  • Page 50 Apply even feeding pressure on workpiece. Keep pressure applied to feed rate consistent. workpiece. Finished stock is Infeed/outfeed table Ensure outfeed table is parallel with cutterhead, concave/convex in are not coplanar. and outfeed/infeed table are coplanar. the middle. 50 | Page Oliver Machinery 4265 Jointer...

  • Page 51: Wiring Diagram

    Wiring Diagram For Stock # 4265.101.4S (230V, 1Ph) 4265 Jointer OLIVERMACHINERY.NET 51 | Page...

  • Page 52: For Stock # 4265.102.4S (230/460V, 3Ph)

    For Stock # 4265.102.4S (230/460V, 3Ph) 52 | Page Oliver Machinery 4265 Jointer...

  • Page 53: Parts List

    Parts List Fence Assembly 4265 Jointer OLIVERMACHINERY.NET 53 | Page...
  • Page 54 Table and Cutterhead Assembly 54 | Page Oliver Machinery 4265 Jointer...

  • Page 55: Base Assembly

    Base Assembly 4265 Jointer OLIVERMACHINERY.NET 55 | Page...

  • Page 56: Motor And Cabinet

    Motor and Cabinet 56 | Page Oliver Machinery 4265 Jointer...
  • Page 57 000202-106 Set Screw M5*0.8P*20 006001-125 Flat Washer 15.5*25*2.5t 230405-000 Adjust Handle 361333-904 Shaft 174620-904 Fence Adjust Plate 000802-102 Flat Head Cap Screw M8*1.25P*20 000103-110 Cap Screw M6*1.0P*35 006004-205 Flat Washer 6.8*14*0.3t 000103-108 Cap Screw M6*1.0P*25 4265 Jointer OLIVERMACHINERY.NET 57 | Page...
  • Page 58 006307-100 Spring Washer 10.2*18.5 000105-103 Cap Screw M10*1.5P*30 051400-902 Bearing Housing 000105-107 Cap Screw M10*1.5P*50 924682-000 Cutterhead Assembly 038201-101 Torx Screw #10-32NF*1/2'' P-15mm 4S Carbide Inserts (Sold in Packs of 10) 15*15*2.5t 012004-002 Key 6*6*30 58 | Page Oliver Machinery 4265 Jointer...
  • Page 59 000702-104 Socket Flat Head Hex Screw Only used SN 192984 and beyond 280082-000 Torsion Spring 000102-116 Cap Screw M5*0.8P*15 174644-000 Front Cover (Left) 174643-000 Front Cover (Right) 230156-615 Knob 250496-615 Handle 361300-902 Rod 008011-100 Hex Nut M16*2.0P(24B*13H) 4265 Jointer OLIVERMACHINERY.NET 59 | Page...
  • Page 60 011003-114 Spring Pin 5*20 012003-001 Key 5*5*8 361302-902 Position Shaft 330067-000 Bushing 000801-101 Flat Head Cap Screw M6*1.0P*10 174518-902 Plate 006004-070 Flat Washer 10*22*0.8t 008308-100 Lock Nut M10*1.5P(17B*12H) 381395-902 Position Bolt 051407-902 Bracket 60 | Page Oliver Machinery 4265 Jointer...
  • Page 61 000003-106 Hex Screw M8*1.25P*30 000002-107 Hex Screw M6*1.0P*40 008005-100 Hex Nut M6*1.0P(10B*5H) 174647-000 Cutterhead Front Cover 000801-104 Flat Head Cap Screw M6*1.0P*20 174612-008 Digital Readout Position Plate 000103-106 Cap Screw M6*1.0P*16 000301-204 Pan Phillips Screw M3*0.5P*15 4265 Jointer OLIVERMACHINERY.NET 61 | Page...
  • Page 62 191 174770-000 Switch Box 192 000302-102 Pan Phillips Screw M4*0.7P*8 193 006001-001 Flat Washer 4.3*10*1.0t 194 021103-100 Zip Tie ACC-3-B 195 021802-000 Snap Bushing NB-2430 196 924571-000 Switch Pedestal Assembly 197 000005-111 Hex Screw M12*1.75P*30 62 | Page Oliver Machinery 4265 Jointer...
  • Page 63 Baldor Motor 5HP 3Ph 230/460V 008009-100 Hex Nut M12*1.75P(19B*10H) 006001-091 Flat Washer 13*28*3.0t 380249-901 Adjusting Shaft Assembly 361303-902 Supporting Shaft 001902-105 Set Lock Screw M6*1.0P*12 190074-901 Spacer 050321-008 Motor Mounting Plate 174640-000 Stand 230403-000 Foot 4265 Jointer OLIVERMACHINERY.NET 63 | Page...
  • Page 64 10AWG*4C*760mm 242.8 474001-013 CSA Cable 18AWG*4C*1550mm 242.9 472001-050 CSA Cable 18AWG*2C*2000mm Note: 440V 3Phase operation requires special components, contact Oliver Machinery. 491192-000 440V Magnetic Contactor 491191-000 440V Overload RA-20 5.2 - 6.5 - 8A 000804-103 Flat Head Cap Screw M5*0.8P*10...
  • Page 65 Insert (Sold in Box Of 10) 038201-101 Torx Screw #10-32UNF*1/2" Tools for Assembly Part Number Descriptions Specifications 250035-629 Push Blocks 040005-000 Hex Wrench 040006-000 Hex Wrench 040007-000 Hex Wrench 040204-000 Open End Wrench 12mm/14mm 040710-000 Torx Screwdriver T-25 4265 Jointer OLIVERMACHINERY.NET 65 | Page...

  • Page 66: Maintenance Record

    Maintenance Record Date Task Operator 66 | Page Oliver Machinery 4265 Jointer...

  • Page 67: Notes

    Notes 4265 Jointer OLIVERMACHINERY.NET 67 | Page...

  • Page 68: Warranty And Service

    Oliver Machinery makes every effort to assure that its equipment meets the highest possible standards of quality and durability. All products sold by Oliver Machinery are warranted to the original customer to be free from defects for a period of two (2) years on all parts excluding electronics and motors which are warranted for one (1) year from the date of shipment.

  • Page 69: Appendix

    .9062 23.018 27/64 .4219 10.715 59/64 .9219 23.415 7/16 .4375 11.112 15/16 .9375 23.812 29/64 .4531 11.509 61/64 .9531 24.209 15/32 .4687 11.906 31/32 .9687 24.606 31/64 .4844 12.303 63/64 .9844 25.003 12.700 25.400 4265 Jointer OLIVERMACHINERY.NET 69 | Page...
  • Page 70 Oliver Machinery is always adding new Industrial Woodworking products to the line. For complete, up-to-date product information, visit us online at: WWW.OLIVERMACHINERY.NET or call toll free 1-800-559-5065 ** SAVE THIS MANUAL FOR FUTURE REFERENCES. **...

Table of Contents