Setting Up Clients - Epson AcuLaser C9100 Reference Manual

You need to set the client computers so that they can use the
printer on a network. See the following pages for details:
❏ "With Windows Me, 98, or 95" on page 178
❏ "With Windows XP or 2000" on page 179
❏ "With Windows NT 4.0" on page 183

Setting up clients

This section describes how to install the printer driver by
accessing the shared printer on a network.
Note:
❏ To share the printer on a Windows network, you need to set the print
server. For details, see "Setting up your printer as a shared printer"
on page 169 (Windows Me, 98, or 95) or "Using an additional
driver" on page 171 (Windows XP, 2000, NT 4.0, or Server 2003).
❏ This section describes how to access the shared printer on a standard
network system using the server (Microsoft workgroup). If you
cannot access the shared printer due to the network system, ask the
administrator of the network for assistance.
❏ This section describes how to install the printer driver by accessing
the shared printer from the Printers folder. You can also access the
shared printer from Network Neighborhood or My Network on the
Windows desktop.
❏ You cannot use the additional driver on the server system OS.
❏ When you want to use EPSON Status Monitor 3 at clients, you
have to install both of the printer driver and EPSON Status Monitor
3 in each client from the CD-ROM.
Setting Up Your Printer on a Network
5
5
5
5
5
5
5
5
5
5
5
5
177