Usb Menu - Epson AcuLaser C9100 Reference Manual

USB Menu

These settings control communication between the printer and
the computer when using the USB interface.
Item
*1
USB I/F
USB Speed
USB ExtI/F Confg
Get IP Address
*3*4*5
IP
*3
SM
*3
GW
*3
NetWare
AppleTalk
MS Network
Rendezvous
USB Ext I/F Init
Buffer Size
*1 After this item is changed, the setting value takes effect after a warm boot
or after the power is turned on again. While it is reflected in the Status Sheet
and EJL read-back, the actual change takes effect after a warm boot or
after the power is turned on again.
*2 Displayed only when a USB external device with D4 support is connected. The
*3 Displayed only when a USB external device with D4 support is connected
and the
on the USB external device settings.
*4 Displayed only when the
cannot be changed.
*5 When the
panel setting values are saved. When
saved setting values are displayed. 192.168.192.168 if the settings are not
made from the panel.
360
Functions of the Control Panel
Settings (default in bold)
On, Off
*1
HS, FS
*2
No, Yes
*3
Panel, Auto, PING
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
On, Off
*3
On, Off
*3
On, Off
*3
On, Off
*3
-
*1
Normal, Maximum, Minimum
setting is set to
setting is set to
setting is changed from
automatically when exiting the panel settings.
. The contents of the settings depend
setting is set to
is changed to
. This setting
or to , the
or , the