The Printed Image Is Light Or Faint; The Non-Printed Side Of The Page Is Dirty - Epson AcuLaser C9100 Reference Manual

The printed image is light or faint

Cause
Your paper may be moist or
damp.
The Toner Save mode may be
on.
There may be no toner left in
the toner cartridge.
There may be a problem with
the photoconductor unit .

The non-printed side of the page is dirty

Cause
Toner may have spilled onto
the paper feed path.
What to do
Do not store your paper in a humid or
damp environment.
Turn off the Toner Save mode using the
printer driver or the printer's control
panel menus. To modify the Toner Save
mode using the printer driver, select the
Advanced button in the Basic Setting
menu, and click the More Settings.
Deselect the Toner Save check box in
the More Settings dialog box that
appears.
If the message on the LCD panel or in
EPSON Status Monitor 3 indicates that
the amount of toner left is low, see
"Replacing a toner cartridge" on page
227.
Replace the photoconductor unit . See
"Photoconductor Unit" on page 231.
What to do
Clean internal printer components by
printing three pages with only one
character per page.
Troubleshooting
8
8
8
8
8
8
8
8
8
8
8
8
287