Epson AcuLaser C9100 Reference Manual page 420

Note:
If necessary, click the Change scope button and then specify the
IP addresses of the client computers for which the port is unblocked.
4. Click OK.
C. For Laser Printer Users
If you share the laser printers on the computer running Windows
XP Service Pack 2, client computers with the following conditions
cannot monitor the printers using EPSON Status Monitor 3:
❏ Client computers running Windows Me/98/95
❏ Client computers located in another network segment
Solution
1. Click Start, point to Control Panel, and then select Security
Center. Click Windows Firewall.
2. Click the Exceptions tab, and then click the Add Program
button.
3. Click the Browse button.
4. Select the program located in the following folder, using the
Look in pull-down menu.
C:\Program Files\Common Files\EPSON\EBAPI\
EEBAgent.exe
Note:
❏ Substitute the drive letter for your operating system.
❏ If you have upgraded EPSON Status Monitor 2 to EPSON
Status Monitor 3, select the folder where EPSON Status
Monitor 2 is installed.
420
Notice for Windows XP Users