Completely Blank Pages Are Output - Epson AcuLaser C9100 Reference Manual

Completely blank pages are output

Cause
The printer may have loaded
more than one sheet at a time.
There may be no toner left in
the toner cartridge.
The problem may be with your
application or interface cable.
The Paper Size setting may be
incorrect.
There may be a problem with
the photoconductor unit .
MP Tray Size setting may be
incorrect.
286
Troubleshooting
What to do
Remove the paper stack and fan it. Tap
it on a flat surface to even the edges, then
reload the paper.
If the message on the LCD panel or in the
EPSON Status Monitor 3 indicates that
the amount of toner is low, see
"Replacing a toner cartridge" on page
227.
Print out a status sheet. See "Printing a
Status Sheet" on page 276. If a blank
page is ejected, the problem may be with
the printer. Turn off the printer and
contact your dealer.
Make sure the correct paper size is set in
the Tray Menu on the control panel.
Replace the photoconductor unit . See
"Photoconductor Unit" on page 231.
When loading paper for which the size
is not specified with Auto setting,
specify the correct paper size on the MP
Tray Size setting in the Tray Menu on the
control panel.