SPA Cable Management Brackets
SPA Cable Management Brackets
SPAs are shipped with an accessory kit that includes cable management brackets.
cable management brackets installed in a SPA, as well as cable routing.
Figure 6-7
To install cable management brackets on a SPA, perform the following steps:
Screw the two pull assemblies into both sides of the SPA.
Step 1
Insert the cable management bracket into the slot.
Step 2
To remove the cable management bracket, depress the button on the bracket and pull it out.
Step 3
Note
Blank filler plugs are provided if no cable management brackets are installed.
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
6-10
SPA Cable Management Brackets
MODULAR
SERVICES CARD
SPA-4XO C3-ATM
Chapter 6
Installing and Removing a SPA
Figure 6-7
shows
OL-14126-12