Spa Blank Filler Plates; Installing Spa Cable-Management Brackets - Cisco uBR10012 Hardware Installation Manual

Installing and Removing a Shared Port Adapter

SPA Blank Filler Plates

SPA blank filler plates are available to fill an unused SPA bay (subslot).
When a SPA bay is not in use, a SPA blank filler plate must be installed in the empty bay to allow the router
or switch to conform to electromagnetic interference (EMI) emissions requirements and to allow proper airflow
across the SPAs. If you plan to install a new SPA in a bay that is not in use, you must first remove the SPA
blank filler plate.

Installing SPA Cable-Management Brackets

SPAs are shipped with an accessory kit that includes cable-management brackets.
The figure below shows cable-management brackets installed in a SPA, as well as cable routing.
Figure 24: SPA Cable-Management Brackets
1
2
Blank filler plug
Cable-management clip being installed
Cisco uBR10012 Universal Broadband Router SIP and SPA Hardware Installation Guide

SPA Blank Filler Plates

3 Cable-management clip being removed
83