Specifications - AXIOMTEK CEM710 User Manual

CEM710 COM Express
1.2

Specifications

⚫
CPU
Xeon D
®
◼ Intel
Xeon D
®
◼ Intel
® ®
◼ Intel Xeon
® ®
◼ Intel Xeon
® ®
◼ Intel Xeon
® ®
◼ Intel Xeon
® ®
◼ Intel Xeon
⚫ Chipset
◼ NA
⚫ BIOS
◼
American Megatrends Inc. BIOS
⚫ System Memory
◼ Two DDR4-2400 SO-DIMMs (64GB max/SO-DIMM) with ECC support. Maximum
memory frequency is based on processor number.
◼ To ensure compatibility with memory modules from different vendors, the default
memory frequency is set to 1866MHz. After system boot, the memory frequency can
be adjusted to the maximum of 2400MHz in the BIOS, depending on the module's
frequency. Alternatively, you can consult Axiomtek AE for recommendations on
memory modules that have been tested and verified.
⚫ TPM
◼ Trusted Platform Module compatible with TPM2.0 Main and PC Client specification
based on Intel
⚫ Expansion Interface
◼ One PCIe x16 v3.0 (8GT/s) configurable as 1x16, 2x8, 1x8+2x4, 2x4+1x8, 4x4
◼ One PCIe x8 v3.0 (8GT/s) configurable as 1x8, 2x4
◼ One PCIe x8 v2.0 (5GT/s); (PCIe lane 7 is supported by build option, in place of
GbE)
⚫ USB Interface
◼ Four USB ports comply with USB Spec. Rev. 3.2 Gen.1
◼ Four USB ports comply with USB Spec. Rev. 2.0
⚫ SATA Interface
◼
Two SATA 6Gb/s ports supported through COM Express
⚫ Graphics
◼ NA
⚫ Ethernet
®
◼ One Intel I226 2500/1000/100/10Mbps supports Wake-on-LAN, PXE Boot ROM,
NCSI
◼ Four 10Gbe KR interfaces support NCSI
⚫ General Purpose Serial Interface
◼ Support two UART TX/RX interfaces with console redirect
2
TM Type 7 Module
®
BGA processor
®
BGA processor
D-1712TR (4x2.0 GHz, 10MB cache, 50G Eth, 40W)
D-1715TER (4x2.4 GHz, 10MB cache, 50G Eth, 50W)
D-1732TE (8x1.9 GHz, 15MB cache, 50G Eth, 52W)
D-1735TR (8x2.2 GHz, 15MB cache, 50G Eth, 59W)
D-1746TER (10x2.0 GHz, 15MB cache, 100G Eth, 67W)
®
SPI Bus Interface.
TM
connector
Introduction