Altronix AL624 Series Installation Manual

Altronix AL624 linear power supply/charger kits have a wide range of applications including: access control, security
and CCTV system accessories that require additional power.
Output:
• See below for the specific model.
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
Battery Backup:
• Built-in charger for sealed lead acid or
gel type batteries.
• Automatic switch over to stand-by battery
when AC fails.
• Maximum charge current 0.3A.
• PTC battery protection.
AL62412C/AL62412CX:
• 12VDC @ 1.2A continuous supply current.
• Kit includes: power supply, 12VDC 4AH (AL62412CX and AL62424CX - 12VDC 7AH) rechargeable
battery and 16.5VAC 20VA Class 2 Rated plug-in transformer.
AL62424C:
• 24VDC @ 750 mA continuous supply current.
• Kit includes: power supply, two (2) 12VDC 4AH rechargeable batteries and 24VAC 40VA Class 2 Rated
plug-in transformer.
1. Mount unit in the desired location/enclosure (mounting hardware included).
2. Unit is factory set for correct output voltage.
3. Connect wall plug-in transformer to the terminals marked [AC].
Use 18 AWG or larger for all power connections (Battery, DC output).
4. Measure output voltage before connecting devices. This helps avoiding potential damage.
5. Devices to be powered should be connected to the terminals marked [+ DC] and [DC – BAT], carefully
observing polarity.
6. Connect battery to the terminals marked [BAT +] and [DC – NEG] (battery leads included).
Note: When batteries are not used, a loss of AC will result in the loss of output voltage.
AL624 Kits
Linear Power Supply/Chargers
Installation Guide
Overview:
Specifications:
Installation Instructions:
Visual Indicators:
• AC input and DC output LED indicators.
Features:
• Extremely compact design.
• Battery leads included.
Board Dimensions (W x L x H approx.):
3" x 2.5" x 1.125" (76.2mm x 63.5mm x 28.6mm)