Download Print this page

Siemens SIMATIC IPC477E PRO Operating Instructions Manual page 90

Hide thumbs Also See for SIMATIC IPC477E PRO:

Advertisement

Technical specifications
9.1 Certificates and approvals
FCC (USA) and ICES (Canada) Compliance
USA
Federal Communi-
cations Commis-
sion
Radio Frequency
Interference
Statement
Shielded Cables
Modifications
Conditions of
Operations
CANADA
Canadian Notice
Avis Canadien
RCM AUSTRALIA/NEW ZEALAND
This product meets the requirements of EN 61000-6-4:2007 Generic standards - Emission
standard for industrial environments.
This product meets the requirements of the standard EN 61000-6-4:2007 Generic standards –
Emission standard for industrial environments.
KOREA
This product meets the requirements of Korean certification.
This product satisfies the requirement of the Korean Certification (KC Mark).
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기 바라며
가정 외의 지역에서 사용하는 것을 목적으로 합니다.
BIS (India)
This product meets the requirements of the Bureau of Indian Standard (BIS).
Tested according to IS 13252(Part 1):2010/ IEC 60950-1 : 2005.
90
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communi-
cations. Operation of this equipment in a residential area is likely to cause harm-
ful interference in which case the user will be required to correct the interference
at his own expense.
Shielded cables must be used with this equipment to maintain compliance with
FCC regulations.
Changes or modifications not expressly approved by the manufacturer could void
the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
This Class A digital apparatus complies with Canadian ICES-003 (A).
Cet appareil numérique de la classe A est conforme à la norme NMB-
003 (A) du Canada.
Operating Instructions, 08/2024, A5E39912462-AF
SIMATIC IPC477E PRO

Advertisement

loading
Need help?

Need help?

Do you have a question about the SIMATIC IPC477E PRO and is the answer not in the manual?