Siemens SIMATIC IPC477E PRO Operating Instructions Manual page 27

6. If the contents of the package are incomplete, damaged or do not correspond to your order,
you can use the online form After Sales Information System (ASIS)
(https://siemens.com/asis) to provide feedback on product deliveries and repairs.
Complete the online form for product delivery (quality control notification) under the
heading "Product delivery: Feedback on quality control and repairs".
7. Please keep the enclosed documentation in a safe place. It belongs to the device. You need
the documentation when you commission the device for the first time.
8. Write down the identification data of the device.
SIMATIC IPC477E PRO
Operating Instructions, 08/2024, A5E39912462-AF
DANGER
Electric shock and fire hazard due to damaged device
A damaged device can be under hazardous voltage and trigger a fire in the machine or
plant.
A damaged device has unpredictable properties and states.
Death or serious injury could occur.
• Avoid installing and commissioning a damaged device.
• Label the damaged device and keep it locked away.
• Send off the device for immediate repair.
NOTICE
Damage from condensation
If the device is subjected to low temperatures or extreme fluctuations in temperature
during transportation, as is the case in cold weather, for example, moisture can build up
on or inside the device (condensation).
Moisture causes a short circuit in electrical circuits and damages the device.
In order to prevent damage to the device, proceed as follows:
• Store the device in a dry place.
• Bring the device to room temperature before starting it up.
• Do not expose the device to direct heat radiation from a heating device.
• If condensation develops, wait approximately 12 hours or until the device is
completely dry before switching it on.
Mounting and connecting the device
4.1 Preparing for mounting
27