Star Meter CCY106 Installation Instructions Manual

Intelligent wireless differential pressure transmitter

Advertisement

R
Installation instructions
CCY106 intelligent wireless differential pressure transmitter
Safety guidance
This installation instruction contains important information on
how to use the transmitter correctly. The transmitter installer
shall carefully read this operation manual before operating the
transmitter. In case of further understanding or special
problems, which are not described in detail in this
installation manual, please contact our company to obtain
necessary information.
Please pay attention to the warning signs in the manual! It is
forbidden to crystallize or solidify the measured medium,
otherwise the sensor will be damaged!
The operator must strictly follow the installation
instructions. In addition, occupational safety rules, accident
prevention guidelines, national installation standards and
engineering specifications must be observed.
Please keep this manual properly and store it in a convenient
place near the transmitter.
The copyright of these installation instructions is protected.
The installation instructions of this version are written
according to the functions that can be realized by the
corresponding product at the time of printing, and describe the
product functions and operation steps as fully as possible. If
you find mistakes, you are welcome to criticize and correct
them. The company shall not be liable for any possible wrong
description and possible consequences.
3 reserve the right to modify the technical parameters 3
Icon description
Danger! 3 A hazardous situation that could result
ÿ
in death or serious injury.
Warning! 3 A potentially hazardous situation that
ÿ
could result in death or serious injury.
Be careful! 3 A potentially hazardous situation
ÿ
that may result in minor injury.
Reminder! 3 A potentially hazardous situation that
could result in personal injury.
Tips! 3 Tips and information to ensure trouble free
operation of the equipment.
Unpack
a) After unpacking, check whether the documents and accessories
are complete according to the packing list.
Packing documents: one copy of installation instructions.
One product certificate.
A warranty card.
A magnet.
b) When receiving the product, please check whether the package
is intact, and check whether the transmitter model and
specification are consistent with the product you choose.
c) Observe whether the transmitter is damaged due to
transportation for proper treatment.
d) The user is expected to keep the "warranty card" properly
and do not lose it, otherwise it cannot be returned to the
factory for free maintenance!
oçkoWûöÍ|uoÏïèoçkûz÷ïÕöý{öaÿsîß}ï}ïÕÍ|Üwýög{2
ÿnÕ­/½ßoó/þ¯Ĥæ
24_÷oóýÿÿ400-600-4496
Precautions for use
DANGER!
ÿ
The transmitter adopts diffused silicon oil filled core,
which may cause explosion accidents if not used properly. To
ensure safety, it is forbidden to measure oxygen.
DANGER!
ÿ
This product is not explosion-proof, and its use in
explosion-proof area may cause serious personal injury and
material loss.
Warning!
ÿ
It is forbidden to measure the media with incompatible
materials with the transmitter.
! No modifications or changes can be made on the
equipment.
! Handle the transmitter with care and do not throw it at
will. Do not use brute force when installing the transmitter.
When measuring steam or other high-temperature medium, be
careful not to let the medium temperature exceed the upper
limit of the working temperature of the transmitter. If
necessary, a cooling device shall be installed.
In the process of pressure measurement, pressure shall be
increased and relieved slowly to avoid instantaneous increase
to high pressure or decrease to low pressure;
Please do not disassemble or touch the diaphragm when
using it to avoid product damage.
Identification
Intelligent wireless differential pressure sensor
model:
model:
Lower range limit
Lower range limit
Upper range limit
Upper range limit
accuracy
accuracy
ÿ
authentication
Xingyi sensor manufacturing Co.,Ltd
Network system
Network system
Protection Level
Protection Level
Tel
ÿ
Tel
Official website: H ttp://WWW.star-sensor.com
1/10ý
ÿ
Nominal voltage
ÿ
Nominal capacity
ÿ
ÿ
Warning: there is danger of
ÿ
fire and burn in the lithium
battery. The ambient temperature
shall not exceed 100 #
IMEIÿ***************
Product number
ÿ
ÿ
执行标准GB/T17614.1-2015
www.star-sensor.com
îo~
Star Meter
Nominal
voltage
Nominal
capacity
z÷22.04.22

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CCY106 and is the answer not in the manual?

Questions and answers

Summary of Contents for Star Meter CCY106

  • Page 1 îo~ Star Meter Installation instructions CCY106 intelligent wireless differential pressure transmitter Precautions for use Safety guidance This installation instruction contains important information on DANGER! ÿ how to use the transmitter correctly. The transmitter installer The transmitter adopts diffused silicon oil filled core, shall carefully read this operation manual before operating the which may cause explosion accidents if not used properly.
  • Page 2: Installation Precautions

    îo~ Star Meter Installation precautions Try to install it in the place with small temperature gradient change. During installation, it is recommended to keep the pressure interface at both ends horizontal so as to reduce the impact of the installation position on the transmitter.
  • Page 3: Replace The Battery

    îo~ Star Meter -Pipe installation It can be directly installed on 2-inch (DN50) metal pipe, as shown in the following figure: 2 inch (DN50) Mounting bracket Lock nut U-card Note 1: mounting bracket (ZJ03) and U-card (zju01) shall be purchased separately.
  • Page 4 îo~ Star Meter d Replace the sensor rear cover gPress the new battery into the pin and lock the fixing screw Change display direction d Unscrew the front cover of the sensor e Remove the display screen fixing screws f Adjust the display direction (up, down, left and right) according to...
  • Page 5 îo~ Star Meter Key parameter setting -Magnetic induction wake-up The magnet swings in front of the screen to wake up the LCD screen display Header key: M key - long press for 5S to report the data to the platform, s key - to view the equipment IMEI...
  • Page 6 îo~ Star Meter Data platform Log in according to the account and password provided by the manufacturer and the website http://27.128.224.45:8088/#/login Quickly input sensor information Click equipment management and then click Add Application and agreement: after the product type is determined, the corresponding options will appear...
  • Page 7 îo~ Star Meter Command issuance Click View - issue command - set parameters - query Data acquisition cycle: the acquisition time interval of the sensor, in minutes Reporting cycle: the time interval of the reporting platform, in minutes Lower limit of sensor output x value: the minimum value of sensor output (0 by default)
  • Page 8: Query Data

    îo~ Star Meter Query data Real time data and comprehensive data can be queried and viewed by clicking on the home page historical data The data table query shows that the * sign is required. Interface functions: query, table display and graph (temperature, liquid level, signal and voltage) display.
  • Page 9 îo~ Star Meter Data map uowþ Users can drag the map to view the device information within the current map range. If the device has no longitude and latitude information, it will not be displayed, and the filter criteria can be cleared.
  • Page 10 îo~ Star Meter EMC statement Maintenance and cleaning Applicable Directive: electromagnetic compatibility Equipment maintain Directive 2014 / 35 / EU. CE marking indicates that the product meets the requirements of This level transmitter requires no maintenance. applicable EU standards. Maintenance can only be carried out by the manufacturer.

Table of Contents