Connecting The Dsm-520; Video Connections - D-Link MediaLounge DSM-520 User Manual

DSM-520 User's Manual

Connecting the DSM-520

All audio, video, and networking connections are located on the rear panel of the DSM-520.

Video Connections

Select one of four ways to connect video to your DSM-520:
Composite Video Connector
•
Plug the supplied yellow video cable
into the VIDEO connector on the
DSM-520 and the matching opposite
end of the cable to your television
input.
S-Video Connector
•
Plug the supplied S-Video cable
into the S-VIDEO connector on the
DSM-520 and the opposite end
into the S-Video connector on your
television.
Component Video Connectors
•
Match the color coded cables to the
matching COMPONENT connectors
on the DSM-520 and the opposite end
into the component video input of your
television.
Note: This cable is not supplied.
The VIDEO OUT button on the remote control toggles between the composite/S-Video output and the component video output. If
component connectors are used but not selected, the screen will be tinted blue.
D-Link Systems, Inc.
Connecting the DSM-520
32