Wireless - D-Link MediaLounge DSM-520 User Manual

DSM-520 User's Manual
If you do not have a DHCP-enabled router, you will select Static and provide the following
information:
IP: Enter the IP address of the DSM-520.
Netmask: Enter the subnet mask of the DSM-520.
Gateway: Enter the IP address of the router on your network.
DNS: Enter the IP address of the domain name server.
Entering address information:
Press ENTER on the remote control to select a highlighted field. Enter the address
information by using the number keys (0-9) on the remote control. Use the dot button
(".") on the remote control as you would when entering an address on a computer. The
CLEAR button will erase the entire field. Use the left arrow to erase one character.

Wireless

SSID: Enter the SSID (Service Set Identifier,
or the name of the wireless network) by
pressing ENTER on the remote control
when the field is highlighted. The on-screen
keyboard will appear and you can manually
enter an SSID.
Site Survey: When highlighted, press ENTER
on the remote control. A list of available
SSID's will appear. Navigate the list using the
up and down arrows.
Mode: Ad-Hoc Mode is used for peer to peer wireless networks that do not contain a router or
an access point. Infrastructure Mode is used for networks with an access point or router. To
toggle between the two, press the ENTER button when Mode is highlighted. The up arrow
and down arrow will toggle between the two options. Press ENTER again to select.
D-Link Systems, Inc.
Setup
92