Connecting The Dsm-320Rd; Video Connections; Component Connectors - D-Link DSM-320 Quick Installation Manual

Connecting the DSM-320RD

All audio, video, and networking connections are located on the rear panel of the
DSM-320RD.

Video Connections

Select one of three ways to connect video to your DSM-320RD:
• Composite Video Connector
Plug the supplied yellow video cable into
the DSM-320RD and the matching
opposite end of the cable to your television
input.
• S-Video Connector
Plug the supplied S-Video cable into the
S-Video connector and the opposite end
into the S-Video connector on your
television.

• Component Connectors

Match the color coded cables to the
matching connectors on the DSM-320RD
and into the component video input of
your television.
Note: This cable is not supplied.
The VIDEO OUT button on the remote control toggles between the
composite/S-Video output and the component output. If component
connectors are used but not selected, the screen will be tinted blue.
8