D-Link MediaLounge DSM-520 User Manual page 40

DSM-520 User's Manual
Key (continued)
Press the ENTER button on the remote control with this field highlighted to enter a key.
The on-screen keyboard will be displayed and you can enter the key. Keys are defined by
entering in a string in HEX (hexadecimal - using characters 0-9, A-F) or ASCII (American
Standard Code for Information Interchange – alphanumeric characters) format.
Encryption
HEX
ASCII
WPA-PSK
After entering the appropriate wireless settings for your network, use the down arrow to
navigate to the Next button. Press ENTER on the remote control to proceed to the next
Current Network Settings
Your current network settings are displayed
and can be modified at this point. DHCP is
the default setting. The DHCP option allows
your DHCP enabled device to assign the IP
configuration to the DSM-520.
DHCP
If your network has a DHCP server then
press the down arrow on the remote control
to navigate to the Next button. Once the
Next button is highlighted, press ENTER on
the remote control to proceed to the next
screen.
Static
If using a static IP address, press ENTER on the remote control with Configuration
highlighted. The up arrow and down arrow toggle between the options. Press ENTER
to make a selection. The on-screen keyboard or numbers on the remote are used to
enter your address settings. Be sure to enter a unique IP address within the same range
as the network. After entering the appropriate settings for your network, use the down
arrow to navigate to the Next button. Press ENTER on the remote control to proceed
to the next screen.
Please see the Glossary for an explanation of DHCP and static IP addresses.
D-Link Systems, Inc.
64-bit
Character
Example
Length
10 12345678FA
5 DMODE
Character Length
8-63
The DSM-520 Setup Wizard
128-bit
Character
Length
26 456FBCDF123400122225271730
13 2005PIECAKES1
Example
SCOOBY7892SNACK
Example
40