D-Link MediaLounge DSM-520 User Manual page 39

DSM-520 User's Manual
Current Wireless Settings
Your current wireless settings are displayed
based on the SSID you selected in the
previous step. If you chose the enter the
SSID manually, then the default settings are
entered.
SSID
The SSID name selected on the previous screen
appears here. You can change the SSID you
selected or enter one manually by pressing the
ENTER button on the remote control with this
field highlighted. The on-screen keyboard will be
displayed and you can enter the SSID.
Mode
There are two different modes to select from: Ad-Hoc and Infrastructure Mode. Ad-Hoc Mode
is used for peer to peer wireless networks that do not contain a router or an access point.
Infrastructure Mode is used for networks with an access point or router. To toggle between
the two, press the ENTER button when Mode is highlighted. The up arrow and down arrow
will toggle between the two options. Press ENTER again to select.
Encryption
WEP (Wired Equivalent Privacy) & WPA (WiFi Protected Access; a wireless standard designed
to improve upon the security features of WEP), are two encryption technologies used by
wireless devices. There are six options configurable under this setting; Disable, 64bits-Hex,
128bits-Hex, 64bits-ASCII, 128bits-ASCII, and WPA-PSK-TKIP.
To toggle between the options, press the ENTER button when Encrypt is highlighted. The up
arrow and down arrow will toggle between the six options. Press ENTER again to select.
Key Index
Select a number between 1 and 4. To toggle between the options, press the ENTER button
when Key Index is highlighted. The up arrow and down arrow will toggle between the four
options. Press ENTER again to select.
Key
To connect to an encrypted wireless device, the key you enter here must match the key of
the device exactly.
D-Link Systems, Inc.
The DSM-520 Setup Wizard
To use Windows Connect Now, please
®
skip to page 42.
39