Section - Installation
All audio, video, and networking connections are located on the rear panel of the DSM-510.
Select one of two ways to connect video to your DSM-510:
Plug the supplied 3.5mm mini-jack connector into the DSM-510. Plug the opposite end
•
(the yellow video cable and the red and white audio cables) into your television input.
Plug the HDMI cable into the HDMI connector on the back panel of the DSM-510.
•
Plug the opposite end to the matching HDMI connector on your television or audio/video
system.
Note: This cable is not supplied.
By default the DSM-510 will automatically detect and switch between Digital (HDMI)
and Analog (Composite) modes.
High-Definition Multimedia Interface (HDMI) supports standard, enhanced, or high-definition video, plus multi-channel
digital audio on a single cable.
D-Link DSM-510 User Manual
Connecting the DSM-510
Video Connections
Composite Audio/Video Connector
HDMI
15