D-Link MediaLounge DSM-520 User Manual page 33

DSM-520 User's Manual
HDMI
•
Plug the HDMI cable into the HDMI
connector on the back panel of the
DSM-520.
Plug the opposite end to the matching
HDMI connector on your television or
audio/video system.
Note: This cable is not supplied.
Note: The first time you plug in this cable, you will need to press the Video Out button on the
remote control several times until a video signal is received.
High-Definition Multimedia Interface (HDMI) supports standard, enhanced, or high-definition video, plus digital audio on a single
cable.
D-Link Systems, Inc.
Connecting the DSM-520
33