D-Link MediaLounge DSM-520 User Manual page 104

DSM-520 User's Manual
I created a playlist on my computer, but it doesn't appear on my
media player.

Make sure the playlist file is located in a folder shared by your media player. Copy
the playlist to your shared music folder or click on the Media Server icon to add or
change your folder options.
How do I reset my DSM-520?

Under normal circumstances, you should not need to reset your media player. However,
to fully reset the media player, lightly insert a paper clip into the reset opening on the
unit's rear panel for ten seconds.
What version of firmware do I have?
 From the main home screen, press the SETUP button and select Version.The firmware
version will be listed.
I am unable to access Rhapsody

Make sure Rhapsody
your network connections.

Verify that the UPnP Server has been started in Rhapsody
application on your computer, go to Options, select User Settings, and go to the UPnP
tab. If the Status is stopped, click on the Start button. Be sure to check Start UPnP
server once logged in.

Make sure you are able to play audio from within the Rhapsody
computer. If you are unable to play Rhapsody
network and Internet connection. If your Internet connection is ok but you are still
unable to play Rhapsody
Rhapsody
bottom of the page.
D-Link Systems, Inc.
is running on a computer connected to the network and check
™
content, please contact Rhapsody
™
support, go to http://www.listen.com/dlink and click on Contact Us at the
™
content.
™
™
content from the computer, check your
™
Troubleshooting
. Within the Rhapsody
™
application on the
™
support. To contact
™
104