D-Link MediaLounge DSM-520 User Manual page 38

DSM-520 User's Manual The DSM-520 Setup Wizard
Select Your Network Connection
The connection type defaults to Wireless.
Wireless
If using a wireless network, press the down
arrow on the remote control to navigate to
the Next button. Once the Next button is
highlighted, press ENTER on the remote
control to proceed to the next screen.
Wired
To select Wired, press the ENTER button on
the remote control while the Connection is highlighted. Press the up arrow on the remote
control to choose Wired. Press ENTER again to make the selection and then press the
down arrow on the remote control to navigate to the Next button. Once the Next button is
highlighted, press ENTER on the remote control to proceed to the next screen. Skip to the
Current Network Settings screen on page 40.
Select the SSID
Select the SSID (network identifier) that is
being used by your wireless network. To
select an SSID, press ENTER on the remote
control while the SSID window is highlighted.
Use the up arrow and down arrow buttons
on the remote control to navigate through the
list. Once you've highlighted the correct SSID,
press ENTER on the remote control. Press the
down arrow on the remote control to navigate
to the Next button.
If you cannot locate the SSID, select <Manually Enter SSID> and you will be able to enter it
on the next screen.
D-Link Systems, Inc. 38