Download
Share
Print this page
Draper FlexShade ZIP 92 Installation And Operation Instruction Manual
  1. Manuals
  2. Brands
  3. Draper Manuals
  4. Window Blinds
  5. FlexShade ZIP 92
  6. Installation and operation instruction manual
Draper FlexShade ZIP 92 Installation And Operation Instruction Manual

Draper FlexShade ZIP 92 Installation And Operation Instruction Manual

Hide thumbs Also See for FlexShade ZIP 92:

Advertisement

Quick Links

Download this manual
FlexShade
ZIP 92
®
Exterior shading system, ZIP detail creates weather/shading barrier
protects against wind, sun, snow, and insects to maintain a comfortable space

Overview - Components

FLEX ZIP 92
E N D
C A P
( c u
E N D
r v e
d )
C A P
( s q
u a r
e )
Contents
Overview - Components ....................................................................................................1
PLEASE READ - Important Safety & Installation Information .....................................2
PLEASE READ - Cleaning and Maintenance ..................................................................2
Section 1 - Site Preparation .............................................................................................3
Section 8 - Installing Side Channels: Jamb Mounted Shade ....................................10
TOOLS REQUIRED
TAPE MEASURE
PENCIL
Read and understand all warnings before beginning installation.
.................4
....................................................................5
......................................6
................7
......................................................8
E N D
C A P
( s q
E N D
u a r
C A P
e )
( c u
r v e
Measuring Note for installing with
d )
ZIP 2" U Channel Adaptors
Please note before ordering shade.
LASER LEVEL
LEVEL
POWER DRILL
CAUTION
Section 11 - Cable Exit .....................................................................................................14
Section 12 - Reinstalling Side Channel Covers ..........................................................15
Section 14 - Limit Setting: Standard 4-wire Motors ...................................................16
Section 15 - Limit Setting: Standard and Quiet Motors .............................................17
Section 16 - Complete Electrical Connection .............................................................17
Section 17 - Dimensions .................................................................................................18
Section 18 - Overall Dimensions ....................................................................................19
INSTRUCTIONS
INSTALLATION & OPERATION
Side
Channel
Mounting Hardware
Compress foam padding.
Please Note:
The following applies ONLY if installing with a
2" U Channel accessory, as shown on Page 12.
If measuring BEFORE a 2" U channel adaptor is
•
installed, measure
INSIDE
of the recess or
between jambs and deduct 1/2" from width
measure as Inside Measurement entry.
•
If measuring AFTER a 2" U channel adaptor is
installed, measure
INSIDE
of U channel
adaptors and deduct 1/4" from width measure
as Inside Measurement entry.
IMPORTANT: Use the narrowest measurement
at the top/middle/bottom.
HARDWARE
SCREWDRIVER
(by others)
..................................................................................12
........................................................14
...................................................................15
If you have any difficulties installing or servicing your
FlexShade ZIP, call your dealer or Draper, Inc.
Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385
draperinc.com | 765.987.7999 | 800.238.7999
|
© 2024 All Rights Reserved
FORM: FS_ZIP_92_Inst24
(Page 12)
Side Channel
(by others)
HEX WRENCH

Advertisement

loading
Need help?

Need help?

Do you have a question about the FlexShade ZIP 92 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Draper FlexShade ZIP 92

Summary of Contents for Draper FlexShade ZIP 92

  • Page 1: Table Of Contents

    Section 8 - Installing Side Channels: Jamb Mounted Shade ........10 If you have any difficulties installing or servicing your FlexShade ZIP, call your dealer or Draper, Inc. Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385 draperinc.com | 765.987.7999 | 800.238.7999 © 2024 All Rights Reserved...

  • Page 2: Please Read - Important Safety & Installation Information

    However, exterior shading systems require additional cleaning and maintenance as needed. Most standard Draper fabrics may be cleaned by vacuuming with a soft brush attachment. They also may be cleaned by using a sponge or soft cloth and mild solution of warm soapy water. A mild dishwashing liquid is recommended. A clean dry cloth is recommended for the metal finish.

  • Page 3: Section 1 - Site Preparation

    3 of 19 ® Section 1 - Site Preparation RECOMMENDED Please Note: Draper recommends that a team of at least TWO people install this product. PERSONNEL Caution: Before mounting shades, verify measurements on label provided with shade, and ensure unit is installed at correct width.

  • Page 4: Section 2 - Mounting Headbox With Brackets

    FlexShade ZIP 92 page 4 of 19 ® Section 2 - Mounting Headbox with Brackets (Standard Installation Method) Note: Mounting Bracket positioning as directed in Section 1. Ensure brackets are level. Please Note: Installation requires use of AT LEAST TWO of the top mounting holes.

  • Page 5: Section 3 - Removing Fascia (Optional Step)

    FlexShade ZIP 92 page 5 of 19 ® Section 3 - Removing Fascia (Optional Step) Please Note: Fascia ONLY requires removal if directly attaching shade to mounting surface (Section 5, Page 6) Removing fascia is OPTIONAL for all other methods of installation. Remove Screws from bottom of Headbox.

  • Page 6: Section 4 - Removing Shade Roller Assembly

    FlexShade ZIP 92 page 6 of 19 ® Section 4 - Removing Shade Roller Assembly (Optional Step) Please Note: Shade Roller ONLY requires removal if directly attaching headbox to mounting surface (Section 5, Page 7) Remove the Quick Release Pin from Idler End of Roller Assembly.

  • Page 7: Section 5 - Direct Mounting To Ceiling Or Wall

    FlexShade ZIP 92 page 7 of 19 ® Section 5 - Direct Mounting to Ceiling or Wall (Alternate Installation Method) NOTE: This step requires removing Fascia and Roller Assembly. See Section 3 - Removing Fascia and Section 4 - Removing Shade Roller Assembly (Page 6) (Page 5) Using the tabs on the endcap...
  • Page 8 FlexShade ZIP 92 page 8 of 19 ® Section 6 - Replacing Roller Assembly (If applicable) Please Note: Fascia and Roller Assembly only require removal if shade is directly mounted to mounting surface. Removing fascia is OPTIONAL for all other methods of installation. Please Note: Section 10 must be completed before replacing the Fascia.

  • Page 9: Section 6 - Replacing Roller Assembly

    FlexShade ZIP 92 page 9 of 19 ® Section 7 - Installing Side Channels: Wall or Face Mounted Shade NOTE: Side Channels must be installed parallel and square with a tolerance of 1/ 8 ". Each side channel should be installed plumb with a tolerance of 1/ 1 6" over height of opening. IMPORTANT: DO NOT trim top of side channels.

  • Page 10: Section 8 - Installing Side Channels: Jamb Mounted Shade

    FlexShade ZIP 92 page 10 of 19 ® Section 8 - Installing Side Channels: Jamb Mounted Shade NOTE: Side Channels must be installed parallel and square with a tolerance of 1/ 8 ". Each side channel should be installed plumb with a tolerance of 1/ 1 6" over height of opening. IMPORTANT: DO NOT trim top of side channels.
  • Page 11 FlexShade ZIP 92 page 11 of 19 ® Section 8 (continued) Move Side Channel into position while engaging Side Channel Guide with locator tab on the back side of Endcap, behind Roller (shown in orange) Attach Side Channel to structure using appropriate fasteners.

  • Page 12: Section 9 - Mounting Headbox And Side Channels In Recessed Pockets

    FlexShade ZIP 92 page 12 of 19 ® Section 9 - Mounting Headbox and Side Channels in Recessed Pockets (Alternate Hardware & Installation Method) Please Note: 2" U Channel Adaptor option MUST be ordered for the channel to be included with unit — it is not provided standard.
  • Page 13 FlexShade ZIP 92 page 13 of 19 ® Place modified Side Channel Cut foam strips Side Channel into 'U' Channel into 1.5" (provided) and secure it with squares and (38mm) Side Channel appropriate mounting attach them to the Mounting Hardware hardware, through (by others) 'U' Channel at all...

  • Page 14: Section 10 - Channel Adaptors

    FlexShade ZIP 92 page 14 of 19 ® Section 10 - Channel Adaptors (Optional Hardware) Use and configuration of Channel Adaptors is • If opening is not suitable for site dependent: Each installation may require direct mounting due to uneven different adaptors or a combination of adaptors.

  • Page 15: Section 12 - Reinstalling Side Channel Covers

    FlexShade ZIP 92 page 15 of 19 ® Section 12 - Reinstalling Side Channel Covers Replace the provided screws. Re-attach Side Channel Covers. Please Note: Failure to use provided fasteners to re-attach Side Please Note: Ensure foam Channel covers may result in cushions are not pinched, product failure in high wind.

  • Page 16: Section 14 - Limit Setting: Standard 4-Wire Motors

    FlexShade ZIP 92 page 16 of 19 ® Section 14 - Limit Setting: Standard 4-wire Motors Programming Instructions 1. Connect power to one motor. Select a transmitter channel to assign motor. 2. Hold UP and DOWN buttons until motor jogs, then release. 3.

  • Page 17: Section 15 - Limit Setting: Standard And Quiet Motors

    Connections should be made in accordance with attached wiring diagram, and (es) (es) wiring should comply with national and local electrical codes. DO NOT wire motors in parallel without written permission from Draper ® All operating switches should be “off” before power is connected. Controls & System Overview Controls &...

  • Page 18: Section 17 - Dimensions

    FlexShade ZIP 92 page 18 of 19 ® Section 17 - Dimensions Wall Mounting Bracket Side View Wall Mounted Headbox with 4" Wall Mounted Side Channels (102mm) 3 " (92mm) 1" (25mm) 1 " 3 " (44mm) (92mm) 5 " (148mm) "...

  • Page 19: Section 18 - Overall Dimensions

    FlexShade ZIP 92 page 19 of 19 ® Section 18 - Overall Dimensions Shade Width FOR ZIP 92 Headbox Height (149mm) Shade Height Headbox Height Side (92mm) Channel Length 2 " (57mm) Hem Bar Length (41mm) (41mm)