Memory Operation; E Memory Channel Selection; Bi Transferring Memory Contents - Icom IC-A22 Instruction Manual

ll Memory channel selection
The transceiver has 50 memory channels for storage of
often-used frequencies along with 6-character notes.
CD Push [MR] to select memory mode.
(2 Select the desired memory channel.
Using the tuning dial:
Rotate the tuning dial to select the desired memory
channel.
e Only programmed memory channels appear.
Using the keypad:
Push 2 appropriate digit keys (01—50) to select the
desired memory channel.
e To select memory channels 1—9, push [1]-[9] then [ENT]; or,
push [0] then [1]-[9].
Using the A / V keys:
Push [A] or [W] to change the memory channel.
e Pushing [À] or [W] changes the memory channel contin-
uously.
@ When a comment appears, push [MR] to display the
programmed frequency, if desired.
(4) To return to frequency mode, push [CLR].
Comments appear first when programmed, however, the
transceiver can be programmed to show the operating
frequency first by your dealer. Push [MR] to display the
comment in this case.
{Қ
4
MEMORY OPERATION
W Transferring memory
contents
This function transfers a memory channel's contents into
the frequency mode. This is useful when searching for
signals around a memory channel's frequency.
MW
@® then
Memory mode Frequency mode
(D Push [MR] to select memory mode. -
e "M" appears.
(2 Select the desired memory channel to be transferred
using the tuning dial or keypad.
© Push [F] then [MR-MW].
e "M" disappears as frequency mode is automatically selected
and the memory contents are transferred.
14