Programming Notes; Channel O000N00S - Icom IC-A22 Instruction Manual

4 Қ
4 MEMORY OPERATION
You can program the following data into each memory
channel separately.
e Operating frequency (pgs. 11, 12)
e 6 digit comment (p. 15)
e Lockout and duplex* information (pgs. 18, 25)
(D Set the desired frequency in frequency mode:
- Push [CLR] to select frequency mode; or, push [F] then
[ENT-WX] to select a weather channel.*
-Set the desired frequency or weather channel* using the
tuning dial or keypad.
@ Push [F] then [MR-MW].
e "M" blinks.
(à Push [MR] to enter the frequency and to write a com-
ment; push [ENT] to program the frequency and to skip
writing a comment.
e Push [ENT] to program a weather channel.* A comment
cannot be programmed with a weather channel.
e Push [CLR] to cancel programming.
(5 Set a desired comment as described at right.
© Push [ENT] to program.
* Weather channel and duplex function: U.S.A. version only.
(D Set the desired frequency in frequency mode.
(2) Push [F] then [MR-MW].
@ Select the memory channel to be programmed.
@ Push [MR] to enter the frequency.
[ e v Темен Key [Characer| Key [Character
CO| «az [CO алво зое
CO «en cO | soc [CO em o
*' Hyphen is selectable between the 3rd and 4th digits only.
(6 Push [ENT] to program.
PROGRAMMING NOTES
.* Pushing [A] or [W] moves the cursor.
e To input characters in the same group, use [A] to
move the cursor.
e To clear the entered comment, push [CLR] before
pushing [ENT]. DR CMG