Magicfx LIQUID FLAME SYSTEM User And Installation Manual page 20

CAUTION
CAUTION
WARNING
CAUTION
CAUTION
NOTICE
20 MAGICFX LIQUID FLAME SYSTEM
Any material that blocks the output nozzle of a flame head can
result in injuries, fire and damage when the LIQUID FLAME SYSTEM
is used. Always inspect the nozzle before operating and remove
any obstructing material.
The LIQUID FLAME SYSTEM should not be used in winds exceeding
20 mph or 32 km/h.
Stop operating the system if any fire occurs outside of normal
operation and/or if anything other than the emitted fuel for the
SFX catches fire. Extinguish any remaining fire immediately with
sand, carbon dioxide, dry powder or any other suitable
extinguishing media. Do not use a water jet. Refer to the safety
data sheet from the used fuel for detailed safety instructions.
Parts of the flame head heat up during operation and can cause
burns when touched. Do not touch any metal parts of a
(recently) triggered flame head.
Only open the inspection cover of the PUMP STATION when the
system is not powered and cooled down.
Always keep the PUMP STATION and the flame heads dry and do
not let excessive amounts of liquids such as rain or snow wet
them.
— User and Installation Manual
®