Magicfx LIQUID FLAME SYSTEM User And Installation Manual page 19

Make sure that the installed PUMP STATION is safely accessible for
CAUTION
operators that need to perform operational tasks, such as refilling.
Using a damaged or an improper installed system component
WARNING
can lead to death, serious injury or property damage. Always
inspect the complete system thoroughly before operation.
Eye contact with fuel under pressure or burning fuel from the
WARNING
machine can lead to serious eye injury. Always wear safety
goggles when you enter the safety zone.
The LIQUID FLAME SYSTEM works with pressurized fuel. Make sure
WARNING
that the fuel pressure is fully dissipated before connecting or
disconnecting hoses. Always wear safety goggles and suitable
gloves when you connect or disconnect hoses.
Fuels are highly flammable and must be handled with caution
WARNING
and in accordance with local health and safety regulations.
Always follow the safety instructions of your fuel supplier.
Never allow smoking, flames, or other sources of ignition near the
WARNING
PUMP STATION and other fuel storage (even when the system is
turned off or in transit).
Always create a safety zone with a distance of >1m around the
WARNING
PUMP STATION.
Always create a safety zone around each flame head and make
WARNING
sure that the prescribed output zone is kept clear. For specific
safety requirements regarding the flame head(s), refer to the
corresponding user and installation manual(s), see Section Other
documentation on page 5.
Missing or obscured safety symbols can lead to death or serious
WARNING
injury. Make sure all safety symbols are correctly in place, see
Section 2.4.
Make sure there are no objects near the flame heads and within
WARNING
their output distance that can be damaged or catch fire by the
emitted flames and fuel.
Make sure there are no substances or gasses present that can be
WARNING
ignited by the emitted flames from the LIQUID FLAME SYSTEM.
MAGICFX LIQUID FLAME SYSTEM
— User and Installation Manual
®
19