Disposal And Recycling - Scheppach EB2000 Translation Of Original Instruction Manual

This could lead to difficult starting and result in cost-
ly repairs.
• Remove the fuel tank cap slowly to release any pres-
sure in tank. Carefully drain the fuel tank.
• Start the engine and let it run until the engine stops
in order to remove the fuel from the carburettor.
• Allow the engine to cool (approx. 5 minutes).
• Remove the spark plug.
• Pour 1 teaspoon of clean 2-cycle oil into the com-
bustion chamber. Pull starter rope slowly several
times to coat internal components. Replace spark
plug.
• Store the auger in a dry location, far away from po-
tential sources of ignition, such as furnaces, hot wa-
ter boilers with gas, gas dryers, etc.
Recommissioning the auger
• Remove spark plug.
• Pull starter rope briskly to clear excess oil from com-
bustion chamber.
• Clean the spark plug and check that the electrode
gap is correct.
• Prepare unit for operation.
• Fill fuel tank with proper fuel / oil mixture.

11. Disposal and recycling

Notes for packaging
The packaging materials are recy-
clable. Please dispose of packag-
ing in an environmentally friendly
manner.
You can find out how to dispose of the disused
device from your local authority or city adminis-
tration.
Fuels and oils
• Before disposing of the unit, the fuel tank and the
engine oil tank must be emptied!
• Fuel and engine oil do not belong in household
waste or drains, but must be collected or disposed
of separately!
• Empty oil and fuel tanks must be disposed of in
an environmentally friendly manner.
30 | GB www.scheppach.com