Check fuel lines, fuel tank cap and fuel tank for leak-
ages or tears.
Do not start the machine with such damage.
Do not refuel the machine when the motor is still hot
or running.
Never refuel the machine close to an open flame.
Period of use:
Using the earth auger can lead to poor circulation in
the fingers, hands or wrists. Symptoms such as pins
and needles, pain, stinging and changes in the skin can
occur.
If these symptoms occur, seek medical help.
Use appropriate gloves and take regular breaks.
Keep this safety information in a safe place.
6. Technical data
Dimensions without drill
w x d x h mm
Motor design
Max. motor performance kW
Displacement ccm
Idle speed r.p.m.
max. speed r.p.m.
Nominal speed auger r.p.m.
Fuel
Tank capacity l
Mixing ratio of 2-stroke motor
oil/fuel
Weight kg
Subject to technical changes!
Noise
Information about noise level measured in accordance
with ISO 22868:
Sound pressure level L
pA
Uncertainty K
pA
Sound power level L
WA
Uncertainty K
WA
26 | GB
Vibration:
Vibration value in accordance with ISO 22867:
Limit the noise and vibration to a minimum!
• Only use appliances which are in perfect working
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.
Warning!
In case of extended working periods, the operating
personnel may suffer circulatory disturbances in their
540 x 310 x 370
hands (vibration white finger) due to vibrations.
Raynaud's syndrome is a vascular disease that caus-
1 cylinder/2-stroke
es the small blood vessels on the fingers and toes to
1.4
cramp in spasms. The affected areas are no longer
52
supplied with sufficient blood and therefore appear
3000
extremely pale. The frequent use of vibrating devices
9600
can cause nerve damage in people whose circulation
0-370
is impaired (e.g. smokers, diabetics).
Petrol 90 octane
If you notice unusual adverse effects, stop working im-
1
mediately and seek medical advice.
Observe the following information to reduce hazards:
1:40
• Keep your body and especially your hands warm in
9.5
• Take regular breaks and move your hands to pro-
• Ensure as little vibration as possible at the machine
7.
87.3 dB
Assembly
3 dB
For packaging reasons, your machine has not been as-
sembled completely.
112.1 dB
3 dB
Inserting the earth auger (fig. 2)
• Place the motor casing on a work bench. Place the
• Insert the locking pin (A).
www.scheppach.com
Right
Left
Measurement uncertainty K
order.
cold weather.
mote circulation.
via regular maintenance and stable parts on the de-
vice.
Before operation
earth auger (7) on the drive shaft (6), ensuring that
both holes are aligned.
19.786 m/s²
19.879 m/s²
1.5 m/s²
Need help?
Do you have a question about the EB2000 and is the answer not in the manual?
Questions and answers