Setting The Administrator Password, Lan, Ipv6, Dns, Etc. (Network) - Canon VB-C500D Operation Manual

Setting the Administrator Password, LAN, IPv6,
DNS, etc. (Network)
You can set the following items.
Administrator Password
Set the Administrator password.
LAN
Set the IP address and other items needed to establish LAN connection.
IPv6
Set IPv6.
DNS
Set the name server address, host name and DDNS.
SNMP
Set the SNMP.
Administrator Password
(1) [Password]
Set the Administrator password. You can use up to eight (single-byte) ASCII characters
(space or printable characters). The factory setting is "camera." If Admin Viewer or VBAdmin
Tools is connected, disconnect the applicable item before changing the password.
(2) [Confirm Password]
Enter the same password for confirmation.
Note
Be sure to change the default Administrator password to ensure security of the system.
Don't forget the new password.
If you have forgotten the Administrator password, press the reset switch to initialize the
settings. See "Initializing with the Reset Switch on the Camera" (
however, that this will reset all settings of the camera, except for time and date, to
their factory settings.
P. 5-21). Take note,
1-7
1
1