Canon VB-C500D Operation Manual page 43

Audio Server
(1) [Audio Transmission from the Camera]
When [Enable] is selected, the audio input through the microphone attached to the camera
can be transmitted to VB-C500 Viewer.
(2) [Input Volume]
Set the volume of input sound in a range of 1 to 100. The greater the value,
the larger the input volume becomes.
(3) [Voice Activity Detection]
If [Enable] is selected, the audio transmission size is reduced temporarily when no audio is
output. This way, the load of the applicable network can be reduced.
(4) [Audio Reception from Viewer]
If [Enable] is selected, the audio from the optional VK Viewer or bundled VK-Lite Viewer can
be received and output from the speaker with amplifier connected to the camera.
(5) [Output Volume]
Set the volume of output sound in a range of 1 to 100. The greater the value, the larger the
output volume becomes.
(6) [Echo Canceller]
If [Enable] is selected, echo between the microphone and speaker is suppressed.
(7) [Audio Input]
Set the microphone input. Select [Line In], [Microphone In (dynamic microphone)] or
[Microphone In (condenser microphone)].
Setting the Image Server, Audio Server and HTTP Server (Server)
1
1
1-29