Canon VB-C500D Operation Manual page 76

Motion Detection Setting Tool
Tip
The status of the detection in peak block view and [Display motion detection status of the
camera] in this tool may not match the actual motion detection status of the camera.
When the motion detection function of the camera is enabled, the video frame rate may
drop compared to when the function is disabled.
Clicking [Edit] in the menu bar and selecting [Copy sensitivity settings] copies the settings
of [Sensitivity], [Size] and [Duration] for the currently selected area (1 to 4). If a different
area (1 to 4) is subsequently selected and [Paste sensitivity settings] is selected from [Edit]
in the menu bar, the copied settings will be pasted to the selected area.
5. Click [Save Motion Detection Settings] to save the settings.
Tip
[Detected] Mode and Display Screen
2-14
The area frame in which the camera is
detecting motion is displayed by blue
solid lines in the viewer.
The area in which the camera is detecting
motion at the specified sensitivity is
displayed by a yellow
or red rectangle inside the motion
detection area frame.
Yellow rectangle: The camera detected
a motion, but it did not meet the [Size]
or [Duration] setting and thus the mode
has not changed to [Detected].
Red rectangle: The camera detected a
motion, but it met the [Size] or
[Duration] setting and thus the mode
has not changed to [Detected].