Canon VB-C500D Operation Manual page 35

Setting the Image Size, Quality, Frame Rate, On-Screen Display of Date and Time, etc. (Video)
(7) [Position of text display]
Select the position to display the text string from [Upper left], [Upper right], [Lower left], or
[Lower right].
(8) [Text string display]
Set a text string of 15 alphanumeric characters or less to superimpose on the image when
(6) [Text display] is set to [Display designated string].
(9) [Color of text]
Select the color of the text to be superimposed on the image from [Black], [Blue], [Cyan],
[Green], [Yellow], [Red], [Magenta], or [White].
(10)[Color of text outline]
Select the text outline color from [Black], [Blue], [Cyan], [Green], [Yellow], [Red], [Magenta],
or [White].
(11)[Color depth of text and outline]
Select the color depth of the text and outline to superimpose on the image from [Fill text and
outline], [Make text only transparent], [Make text only translucent], or [Make text and outline
translucent].
Note
The time superimposed with the on-screen display is not suitable for uses that require high
reliability. If high reliability is always required for monitoring, etc., use this information as
reference only.
Tip
The date and time superimposed with the on-screen display may not match the date and
time set in [Current Date and Time] (
Depending on image quality settings, the on-screen display may be difficult to read.
Perform settings with checking the actual image.
Motion detection detects on-screen display text (
as necessary.
P. 1-12).
P. 2-11). Adjustments should be made
1
1
1-21