Elite ProAV Saker Tab-Tension CineGrey 5D Series User Manual

Electric wall/ceiling projection screen
Hide thumbs Also See for Saker Tab-Tension CineGrey 5D Series:

Advertisement

Electric Wall/Ceiling Projection Screen
Saker Tab-Tension CineGrey 5D®
Important Safety & Warning Precautions
Make sure to read this user's guide and follow the procedures below.
Caution: The screen's Black Top Drop is already set to its maximum drop distance. There is NO extra
Black Top Drop in the roller. Please be aware of this as it will void your warranty with Elite ProAV™.
Unapproved changes or modifications (except for cutting the power cord for hardwire installations) to this unit
are prohibited and will void your warranty.
Please retain this user's guide for future reference.
To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the
manufacturer.
Handle the unit carefully during transportation to avoid any damages.
To ensure safe and reliable operation, direct connection to a properly grounded power source is
advised.
The power outlet supplying power to the unit should be close to the unit and easily accessible.
Do not install the unit on uneven or inclined surfaces.
Do not put heavy objects on the power cord and position it properly to avoid creating a trip
obstacle.
Never overload the power cord to prevent an electric shock or fire due to a loose contact or a short
circuit.
There are not user serviceable parts in this unit. Do not attempt to disassemble this unit by yourself.
No one except authorized technicians can open and make repairs to this unit.
Make sure the power source this unit is connected to has a continuous power flow.
If there is need to use an extension cord, make sure the cord has an equal rating as the appliance to
avoid overheat.
Do not handle the power plug when your hands are wet or your feet are in contact with water.
Do not use this unit under the following circumstances.
Disconnect the power cord under the conditions of heavy rain, wind, thunder or lightning.
Avoid direct Sunshine, rain shower and moisture.
Keep away from fire sources and high temperature to prevent this device from overheating.
Cut off the power supply first before transportation or maintenance.
Fully disconnect from the power supply when the unit is not in use for a long period of time, as
should be done with any other electric household appliance.
To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is
obvious damage or if there are any evident broken parts.
Rev. 041018BR
User's Guide
1
www.eliteproav.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Saker Tab-Tension CineGrey 5D Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Elite ProAV Saker Tab-Tension CineGrey 5D Series

  • Page 1 Caution: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black Top Drop in the roller. Please be aware of this as it will void your warranty with Elite ProAV™. Unapproved changes or modifications (except for cutting the power cord for hardwire installations) to this unit are prohibited and will void your warranty.
  • Page 2: Pre-Installation

    Please be aware of this as it will void the limitation of your warranty. Individual modifications to this product are prohibited and will void the warranty with the manufacturer. Please contact Elite ProAV™ Customer Service for any questions. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 3: Notice To Installer

    Notice to Installer: Please use the following installation instructions to obtain superior optical performance from the CineGrey 5D® Angular Reflective ALR (Ambient Light Rejecting) Screen. Make sure to follow these instructions in order for the CineGrey 5D® to perform correctly. •Angular-Reflective material is not compatible with ultra/short-throw projectors •Minimum lens throw ratio 1.5x image width •Ambient light must not come from the same direction as the projector...
  • Page 4: Installation Instructions

    Installation Instructions For installation assistance, please consult a professional Installer. Elite ProAV™ is not liable for faulty installations. A. Wall Mount I.Flush mount with wall/ceiling brackets (fixed position) M5x11 Bolt Screw Bracket connector Wall/Ceiling Mount Bracket (A) 1. Begin by sliding the bracket connector (D) all the way to each end of the housing.
  • Page 5: Ceiling Mount

    Wrench counter clockwise and the screen will lose tension. Please note this adjustment is not necessary as the tension of the screen has been set to its factory setting for best performance. Please contact Elite ProAV™ for assistance to avoid damaging the screen and voiding your warranty.
  • Page 6: Screen Operation

    Saker Tab-Tension CineGrey 5D | Controls and Accessories A. IR Remote B. RF Remote C. Wall box D. RJ50 cable H. Bubble leveler ZRC1-IR-W1 ZRC1-RF-W1 controller ZRC1-RJ50 ZRC-WB-W1 Screen operation Electric Current: 110v 1. After ensuring the power outlet & screen are compatible (voltage), plug the power cord into the power outlet. 2.
  • Page 7 How to change the RF code (For use when multiple screens/RF remotes are owned) Changing the RF code avoids controlling multiple screens at the same time and prevents electrical interference leading to accidental control of the screen. 1. Remove the batteries 2.
  • Page 8 5. Wireless 5-12 volt trigger (Fig 5): Requires a 3.5mm to 3.5mm mono cable (not included). The Radio Frequency (RF) remote control serves as a dual purpose, independently as a handheld remote control, or as a Wireless 5-12 volt trigger. The radio frequency technology sends a wireless signal that synchronizes the screen’s drop & rise with the projector’s power cycle.
  • Page 9 2. Clear/Reset the Screen’s Drop Position to factory default: Press & hold the “Programming Key + “Stop key” on the wall box controller. For more information, technical support or your local Elite ProAV® contact, please visit www.eliteproav.com Rev. 062024BR...

Table of Contents