Elite ProAV Planate Tab-Tension Series User Manual

Elite ProAV Planate Tab-Tension Series User Manual

Electric motorized tab tensioned projection screen

Advertisement

Electric Motorized Tab-Tensioned Projection Screen
Planate Tab-Tension Series (150")
Important Safety & Warning Precautions
Make sure to read this user's guide and follow the procedures below.
Caution: The screen's Black Top Drop is already set to its maximum drop distance. There is NO extra
Black Top Drop in the roller. Please be aware of this as it will void your warranty with Elite Screens.
Unapproved changes or modifications (except for cutting the power cord for hardwire installations) to this
unit are prohibited and will void your warranty. For more information, please contact our Technical Support
Department at (877) 511-1211 Ext. 604.
Please retain this user's guide for future reference.
To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the
manufacturer.
Handle the unit carefully during transportation to avoid any damages.
To ensure safe and reliable operation, direct connection to a properly grounded power source is
advised.
The power outlet supplying power to the unit should be close to the unit and easily accessible.
Do not install the unit on uneven or inclined surfaces.
Do not put heavy objects on the power cord and position it properly to avoid creating a trip
obstacle.
Never overload the power cord to prevent an electric shock or fire due to a loose contact or a short
circuit.
There are not user serviceable parts in this unit. Do not attempt to disassemble this unit by yourself.
No one except authorized technicians can open and make repairs to this unit.
Make sure the power source this unit is connected to has a continuous power flow.
If there is need to use an extension cord, make sure the cord has an equal rating as the appliance to
avoid overheat.
Do not handle the power plug when your hands are wet or your feet are in contact with water.
Do not use this unit under the following circumstances.
Disconnect the power cord under the conditions of heavy rain, wind, thunder or lightning.
Avoid direct sunshine, rain shower and moisture.
Keep away from fire sources and high temperature to prevent this device from overheating.
Cut off the power supply first before transportation or maintenance.
Fully disconnect from the power supply when the unit is not in use for a long period of time, as
should be done with any other electric household appliance.
To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is
obvious damage or if there are any evidence of broken parts.
JA06042018
User's Guide
1
www.eliteproav.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Planate Tab-Tension Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Elite ProAV Planate Tab-Tension Series

  • Page 1 Electric Motorized Tab-Tensioned Projection Screen Planate Tab-Tension Series (150”) User’s Guide Important Safety & Warning Precautions Make sure to read this user’s guide and follow the procedures below. Caution: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black Top Drop in the roller.
  • Page 2 WARNING The Screen’s Top Black Drop is already set to its maximum drop distance. There is NO extra top black drop in the roller. Please be aware of this as it will void the limitation of your warranty. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 3 Installation Instructions For installation assistance, please consult a professional Installer. Elite Screens is not liable for faulty installations. A.Wall Mount Flush hidden mount (movable position) This mount method allows the screen to slide horizontally. M5x25MM (C) Front view of bracket (A) Side view of bracket (A) 1.
  • Page 4 1 (3.5mm mono) Screen operation Electric Current: Depending upon region, your Elite ProAV™ screen will operate on 100v, 110v or 220v voltage. 1. After ensuring the power outlet & screen are compatible (voltage), plug the power cord into the power outlet.
  • Page 5 Fig 5 The back of the projector DC 5-12V out Wireless 5-12V trigger cable Stop Down For more information, technical support or your local Elite ProAV contact, please visit www.eliteproav.com JA06042018 www.eliteproav.com...

Table of Contents