Elite ProAV Presenter Pro DarkUST 2 Series User Manual

Thank you for choosing the Presenter Pro DarkUST® 2 Series portable projection screen! Please read through this
user guide before utilizing the screen. Correct usage and maintenance will ensure a long product life.
Care & Use Instructions
◆
Elite Screens highly recommends two people to assemble the Presenter Pro screen.
◆ The DarkUST® 2 is a Ceiling/Ambient light rejecting screen material. It is a delicate optical/lenticular material
and should not be folded, bent or creased. Always maintain screen material flat and taut during setup and
disassembly.
*Elite ProAV is not responsible for damages due to negligence resulting from misuse or mishandling of the product
which will void your warranty.
Dust, dirt and scratches on the projection screen surface will affect the quality and performance of the projection
image. Follow the instructions below to properly maintain the screen.
1) The screen surface has a horizontal linear structure. DO NOT wipe the screen up and down or in a circular
motion. Wipe gently from left to right only.
2) Clean the dust on the screen surface with a soft brush or microfiber cloth. A rough/coarse towel or cloth may
damage the screen's surface.
3) Gently wipe the screen with a lightly moistened white lint free cloth with water or with a neutral detergent
(1mL/0.33 oz) mixed with water (1000 mL/33.8 oz).
4) Avoid putting pressure on the screen material when wiping the screen. If dust or other debris is on the surface,
we recommend using an air sprayer to blow them away.
After using the screen, disassemble it and store it in the carrying bag provided.
*Make sure to keep the material protection film and tube for when disassembling the screen.
◆ To avoid damage and injury, the screen should only be operated by adults.
Notes: The following precautions should always be followed to avoid damaging the material, which is not covered
under warranty.
• Don't touch the screen material to avoid leaving fingerprints.
• Use gloves when handling the material.
• Don't scratch the material, as it will leave permanent markings on the screen's surface.
• Don't point to the screen material with a fingertip or other sharp objects to prevent damage to the material.
• Don't use acetone, benzene, alcohol and any other organic solvents to clean the screen material. Using such
chemicals will permanently damage the screen.
08202020JA
Presenter Pro
Ceiling Ambient Light Rejecting Portable Folding-Frame Screen
For bottom placed ultra-short throw projectors
www.eliteproav.com
DarkUST® 2 Series
User's Guide – Z type
1