Elite ProAV Saker Series User Manual

Elite ProAV Saker Series User Manual

Electric wall/ceiling projection screen

Advertisement

Important Safety & Warning Precautions
Make sure to read this user's guide and follow the procedures below.
Caution: The screen's Black Top Drop is already set to its maximum drop distance. There is NO extra
Black Top Drop in the roller. Please be aware of this as it will void your warranty with Elite ProAV™.
Unapproved changes or modifications (except for cutting the power cord for hardwire installations) to this unit
are prohibited and will void your warranty.
Please retain this user's guide for future reference.
To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the
manufacturer.
Handle the unit carefully during transportation to avoid any damage.
To ensure safe and reliable operation, direct connection to a properly grounded power source is
advised.
The power outlet supplying power to the unit should be close to the unit and easily accessible.
Do not install the unit on uneven or inclined surfaces.
Do not put heavy objects on the power cord and position it properly to avoid creating a trip
obstacle.
Never overload the power cord to prevent an electric shock or fire due to a loose contact or a short
circuit.
There are not user serviceable parts in this unit. Do not attempt to disassemble this unit by yourself.
No one except authorized technicians can open and make repairs to this unit.
Make sure the power source this unit is connected to has a continuous power flow.
If there is need to use an extension cord, make sure the cord has an equal rating as the appliance to
avoid overheating.
Do not handle the power plug when your hands are wet, or your feet are in contact with water.
Do not use this unit under the following circumstances.
Disconnect the power cord under the conditions of heavy rain, wind, thunder, or lightning.
Avoid direct Sunshine, rain shower and moisture.
Keep away from fire sources and high temperatures to prevent this device from overheating.
Cut off the power supply first before transportation or maintenance.
Fully disconnect from the power supply when the unit is not in use for a long period of time, as
should be done with any other electric household appliance.
To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is
obvious damage or if there are any evident broken parts.
Rev.042417-D
Electric Wall/Ceiling Projection Screen
User's Guide - E Type (RC1)
Visit
www.elitescreens.com
1
Saker Series
for latest updated version.
www.eliteproav.com
V.1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Saker Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Elite ProAV Saker Series

  • Page 1 Caution: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black Top Drop in the roller. Please be aware of this as it will void your warranty with Elite ProAV™. Unapproved changes or modifications (except for cutting the power cord for hardwire installations) to this unit are prohibited and will void your warranty.
  • Page 2: Pre-Installation

    Individual modifications to this product are prohibited and will void the warranty with the manufacturer. Please contact Elite ProAV™ Customer Service for any questions. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 3: Installation Instructions

    Installation Instructions For installation assistance, please consulta professional Installer. EliteProAV™ is not liable for faulty installations. Rev.09252023-JA www.eliteproav.com...
  • Page 4: Ceiling Mount

    B. Ceiling Mount I. Ceiling Mount (fixed position on end caps) Dry-wall anchors (C) Ceiling Washer (I) M5x60 screw (B) NOTE: The brackets do not slide. They are designed to attach the end caps only. 1. Attach the Wall/Ceiling mount bracket (A) to the Bracket connector (D) located on top of the screen’s housing (preinstalled).
  • Page 5: Screen Operation

    Screen operation Electric Current: 110v. 1. After ensuring the power outlet & screen are compatible (voltage), plug the power cord into the power outlet. 2. Once the screen’s has power, you’ll be able to control it using any of the 6 methods described below. 5 Ways to control your Starling Tab-Tension screen 1.
  • Page 6: Side View

    3. Wall box controller (Item C, Fig 3): The wall box controller switch is a wall mounted control box with an up/stop/down button. It plugs directly into the screen’s RJ50 port. RJ50 PORT: Connects to the Screen RJ50 PORT (RJ50 CABLE ONLY) RJ50 cable Programming 3.5mm mono Projector...
  • Page 7 Here’s how to set up your Wireless 5-12 volt trigger The 5-12V wireless trigger should already be synced and ready to work. Step1: Connect one end of the 3.5 mm mono trigger cable to the RF remote. Step 2: Connect the other 3.5 mm mono end of the cable to your projector Step 3: Turn on the projector and the screen should automatically deploy.

Table of Contents