Canon LBP-1760 User Manual page 74

12.00
4.00 to 999.75
PCL MENU
PITCH=10.00
PITCH appears only if the font source you selected with FNTSRC (font source) and
FONTNUM (font number) above is a scalable font in a fixed pitch typeface. Use this
item to set the pitch of the font. Pitch is measured as the number of equally spaced
characters per inch.
10.00
0.44 to 99.99
PCL MENU
SYMSET=ROMAN-8 *
SYMSET (symbol set) allows you to select the symbol set, a collection of letters,
numbers, punctuation marks and special symbols.
Appendix 2 (see page 168) of this guide shows the names of internal symbol sets you
can select.
If the currently selected font does not support the orientation or symbol set you've
selected, the control panel font selection returns to the factory default setting.
66
The Standard Printing Environment Settings
When the selected font is a bitmap or fixed spacing font, this item will not
appear for selection.
The printer font source is set for 12-point.
To increase the number in increments of 0.25, press Value. To
quickly scroll through the numbers in increments of 1.00, hold
down Value.
To decrease the number in decrements of 0.25, press Shift and
Value, or press and hold Shift and Value to quickly scroll
backwards in decrements of 1.00.
*
The selected pitch is 10 characters per inch.
To increase the number in increments of 0.01, press Value. To
quickly scroll through the numbers in increments of 1.00, press and
hold down Value.
To decrease the number in decrements of 0.01, press Shift and
Value, or press and hold Shift and Value to quickly scroll
backwards in decrements of 1.00.
PITCH is only displayed when the font is Scaled Fixed Space.