Canon LBP-1760 User Manual page 146

PAUSED
PRINTER OPEN
PRINTING...
READY
TONER LOW
KEY NOT VALID
WARMING UP...
TOP BIN FULL
I/O INITIALIZING
WRONG PAPER SIZE
NETWORK OPTION
ERROR
PARALLEL
INTERFACE ERROR
ETHERNET
OPTION ERROR
138
Responding to Error Messages
The printer is off-line.
Press Go to take the printer on-line.
The printer top cover is open.
Close the printer top cover. Press Go to take the printer back on-line.
Printing is in progress.
You will see this message if you try to take the printer off-line by pressing
Go during printing. This message is also displayed when you are
printing one of the internal demonstration or test pages. No action
required. Wait for printing to finish.
Toner in the toner cartridge is low.
Replace the toner cartridge as soon as possible (see page 118).
The printer will continue to operate, but the image print quality will
gradually deteriorate.
This message is displayed when a button that is not enabled in the
current function is pressed.
Press the correct key to complete the current function (see page 12).
The printer is warming up.
Wait until the printer has warmed up and displays READY.
The top output bin is full.
Remove the paper from the top tray.
This massage is displayed when one of the network cards is
establishing a connection to the network.
No action required.
A paper size mismatch has occurred. More than one paper size has
been found in the same tray.
Inspect the trays for mismatched paper and correct.
An incompatible network card has been installed in the printer.
Replace the card. If this error persists, call for service.
The parallel port is not communicating with the controller.
Restart the printer. If this error persists, call for service.
The optional Ethernet card is not communicating with the
controller.
Replace the card.