Canon LBP-1760 User Manual page 57

1
Open the face-up tray, pull out the extension tray if required for the size of paper to
be used, and set the printer to manual feed mode (see page 39).
2
Insert the paper with the surface to be printed on face-up and print on one side of the
paper from the Multi-Purpose tray. (see page 41)
Face-up delivery from the tray will minimize paper curling. However, if the
paper does curl, be sure to flatten it to avoid printing problems.
3
Place the printed paper on the tray with the printed side face-down and the leading edge
going into the printer first. Then, print.
• Curling on the leading edge of the printed paper may cause the paper to
wrinkle, misprint or jam. Be sure to flatten it before duplex printing.
• Ensure the stack of paper does not exceed the limit mark.
• Duplex printing is not possible on envelopes, labels or transparencies.
• Ensure the paper guides are set to the width of the paper. Printing problems
may occur if this is set too loose or too tight.
Printing Envelopes with the Multi-Purpose Tray
2
49