v v v v v Optional envelope feeder area
If the optional envelope feeder is installed, check the envelope feeder area:
1
Remove any envelopes from the envelope feeder. Lower the envelope pressure plate
q and lift back in the extension tray w.
2
Press and hold the release button, then grasp the feeder by its sides q. Gently remove the
envelope feeder from the printer w.
Pressing the
release button
• For details on how to install the envelope feeder, refer to the Getting Started
Guide.
• Before inserting or removing the envelope feeder, ensure the power is
switched off.
Clearing Paper Jams
7
147