Setting Postscript Printing Options; Automatic Personality Switching; Dedicating The Printer To The Postscript Language - Canon LBP-1760 User Manual

Setting PostScript Printing Options

This section describes personality switching, setting up the PostScript environment,
and the PostScript menu.

Automatic personality switching

After successful installation of the PostScript module, the printer is set by factory
default for automatic personality switching on all the active ports. This means the
printer automatically selects the correct personality for the print job based on the type
of data it receives from the host computer. If you leave the printer set for automatic
personality switching, the printer will select the PostScript personality for a print
stream that contains PostScript data.

Dedicating the printer to the PostScript language

Follow the procedure below to dedicate your printer to the PostScript personality.
1
Press Go to take the printer off-line. The On Line indicator should go off. PAUSED
will appear in the display.
2
Press Menu to display the first menu name (PCL MENU) in the top line.
3
Press Menu until you see PARALLEL MENU in the top line.
4
Press Item until you see PERSONALITY=AUTO in the bottom line.
5
Press Value until you see PERSONALITY=PS (PostScript).
6
To select PS, press Enter.
7
Press Go to put the printer back on-line. The printer is now dedicated to the PostScript
Personality.
Setting PostScript Printing Options
5
105