First Time Usage - Futech MULTICROSS 3D User Manual

SAFETY
Please read the safety instructions provided as
separate booklet with the device.
LASER RADIATION – Class 2 Laser product. – Do
not stare into beam
BATTERY
DIFFERENT BATTERY TYPES
This device works with the 18V batteries of
following brands:
· Bosch
· Dewalt
· Festool
· Hikoki
· Makita
· Metabo
· Milwaukee
NOTE
If the voltage goes below 14V the device stops
working. The battery indicator [B] shows the
amount of power that is left in the battery until it
reaches the minimum level of 14 V.
BATTERY CONNECTION
4
Before connecting the 18V battery, please
remove all dust and sand.
· Place the right battery adapter [02] on the
device. The adapter is mounted correctly when
you hear a click.
· Slide the corresponding battery on the battery
adapter [02].
CABLE CONNECTION
This device can also be used with an USB Type-C
cable plugged into the USB Type-C port [01].
Only use the power adapter provided by the
manufacturer.
IMPORTANT
The power adapter is only to use the laser
device without battery. Do not use this power
adapter to charge the 18Vbatteries.

FIRST TIME USAGE

· Remove any protective films where applied.
· Please only use an 18V battery with the correct
adapter.