Using Remote Codes - Brother MFC-9970CDW User Manual

Using Remote Codes

Fax Receive Code
If you answer a fax call on an extension
telephone, you can tell your machine to
receive it by pressing the Fax Receive
Code l51. Wait for the chirping sounds then
replace the handset. (See Easy Receive
on page 36.)
If you answer a fax call at the external
telephone, you can make the machine
receive the fax by pressing Black Start or
Color Start.
Telephone Answer Code
If you receive a voice call and the machine is
in F/T mode, it will start to sound the F/T
(double-ring) after the initial ring delay. If you
pick up the call on an extension telephone
you can turn the F/T ring off by pressing #51
(make sure you press this between the rings).
If the machine answers a voice call and
pseudo/double-rings for you to take over, you
can take the call at the external telephone by
pressing Hook.
Telephone services and external devices
Changing the Remote Codes
6
The preset Fax Receive Code is l51. The
preset Telephone Answer Code is #51. If you
are always disconnected when accessing
6
your External TAD, try changing the
three-digit remote codes, for example ###
and 999.
a
Press MENU.
b
Press a or b to display Fax.
Press Fax.
c
Press a or b to display
Setup Receive.
Press Setup Receive.
d
Press a or b to display Remote Codes.
6
Press Remote Codes.
e
Press On (or Off).
f
If you chose On in step e, enter the new
Fax Receive Code.
Press OK.
g
Enter the new Telephone Answer Code.
Press OK.
h
Press Stop/Exit.
6
6
43