b
Pull out the MP tray support and unfold
the flap (1).
1
c
Lift up the support flap to prevent
envelopes or sheets of thick paper from
sliding off the face down output tray. If
the support flap is closed you should
remove each envelope as soon as it
comes out of the machine.
d
Put up to 3 envelopes or up to 25 sheets
of thick paper [43 lb (163 g/m
MP tray. If you add more envelopes or
paper it may cause a jam. Make sure:
The top edge of the envelope is
positioned between the arrows (1).
The side to be printed on must be
face up.
e
Open the back cover (Face up output
tray).
2
)] in the
Loading paper
2
1
15