Using Remote Codes - Brother MFC-J6925DW Basic User's Manual

Chapter 7
Inadvisable connection of extension
sockets (Fig. 1.)
2
1
1 Extension socket
2 Master socket
3 Incoming line
Recommended connection of extension
sockets (Fig. 2.)
1 1
1 Extension socket
2 Master socket
3 Incoming line
The fax machine must be plugged into the
master socket.
NOTE
These telephones are now connected as
external devices (See Connecting an
external or extension telephone
on page 68), because they are connected
to the fax machine via the T-connector.
70
7
1
3
FAX
7
2
3
FAX

Using remote codes

Remote Activation Code
If you answer a fax call on an extension or
external telephone, you can tell your machine
to receive it by dialling the Remote Activation
Code l 5 1. Wait for the chirping sounds and
then replace the handset. (See Fax Detect
on page 57.)
If you answer a fax call at the external
telephone, you can make the machine
receive the fax by pressing Fax Start and
choose Receive.
Remote Deactivation Code
If you receive a voice call and the machine is
in Fax/Tel mode, it will start to sound the F/T
Ring (fast double-ring) after the initial ring
delay. If you pick up the call on an extension
telephone, you can turn the F/T Ring off by
pressing # 5 1 (make sure you press this
between the rings).
If the machine answers a voice call and fast
double-rings for you to take over, you can
take the call at the external telephone by
pressing Pickup.
Changing the remote codes
If you want to use Remote Activation, you
have to turn on the remote codes. The preset
Remote Activation Code is l 5 1. The preset
Remote Deactivation Code is # 5 1. If you
want to, you can replace them with your own
codes.
a
Press .
b
Press All Settings.
c
Swipe up or down, or press a or b to
display Fax.
d
Press Fax.
7
7
7
7