Loading Paper In The Multi-Purpose Tray (Mp Tray) - Brother MFC-9970CDW User Manual

Chapter 2
d
Put paper in the tray and make sure:
 The paper is below the maximum
paper mark (b b b) (1).
Overfilling the paper tray will cause
paper jams.
 The side to be printed on must be
face down.
 The paper guides touch the sides of
the paper so it will feed properly.
e
Put the paper tray firmly back in the
machine. Make sure that it is completely
inserted into the machine.
f
Lift up the support flap (1) to prevent
paper from sliding off the face down
output tray or remove each page as
soon as it comes out of the machine.
1
12
Loading paper in the
multi-purpose tray (MP tray)
You can load up to 3 envelopes or special
print media in the MP tray or up to 50 sheets
of plain paper. Use this tray to print or copy on
thick paper (28 - 43 lb.), bond paper, glossy
paper, labels, or envelopes. (For
recommended paper to use, see Paper
capacity of the paper trays on page 22.)
1
Printing on plain paper, bond paper,
labels or glossy paper from the MP
tray
a
Open the MP tray and lower it gently.
2
2