Connection 0 Setting - ATC -3000 User Manual

User Manual
ATC-3000 TCP/IP to RS232/422/485 Converter
Figure3. 2 Main menu
Note: Changes to networking parameters will take effect only when one save and reboot ATC-3000.
Select "1" from "Input choice and enter (1~7 or v s q):" to enter show basic settings page as
following.( Figure 3.3)
Figure3. 3 Basic settings
This page gives you the general information of ATC-3000.

3.1.2 Connection 0 setting

Select "2" from "Input choice and enter (1~7 or v s q):" to enter show Connection 0 setting page as following.
Copyright © 2014 SHENZHEN ATC TECHNOLOGY CO., LTD.
5